Chemistry 2 Essay Help Free

Last Revised 9/5/2012

CHE1200L Abstract How to write the abstract

Students will receive a grade on each lab report based on a scale of 25 points. 5 points represents the advanced study, 5 points represent the data, 5 points represent the conclusion questions and 10 points represent the abstract. Completeness and correctness both count towards the grade. The following categories will be included in each grade:

1. Advanced study assignment.

2. Data entry- the data is clearly and completely entered, in ink, at the time when collected. All quantitative data is recorded, not just calculated results.

Example: Mass of beaker with salt 53.6710 g Mass of empty beaker 52.1110 g

Mass of salt 1.5600 g

Qualitative data is clearly labeled and reported in a complete and meaningful manner.

3. Calculations- the calculations clearly show the procedure and formulas used, and report a correct answer with the proper significant figures and units.

4. Results- each lab has a final result, either a correct numerical value for an unknown variable, a graphical or mathematical relationship between variables, identification of unknown substance, or specific qualitative relationship.

5. Conclusion questions (if any).

6. Conclusions- Conclusions will be in the form of an abstract summarizing the experiment. Conclusions will be typed (word processed) and one to two pages long. The abstract should follow the rules of technical writing including capitalization, spelling and grammar. Any calculated results should be clearly expressed. Any sources of error should be mentioned in this section. Your conclusion should be based on your data, not what you think the answer should be. The conclusion may be best written by using the mnemonic RERUN:

Recall- summarize what you did in the experiment

Explain- explain the scientific principle addressed by the experiment, what results you expected (if testing a known relationship).

Results- what results did you get.

Uncertainty- what are your sources of error. Quantitative results should have the uncertainty expressed quantitatively.

New things learned- what important new concepts were shown by the experiment. Link the experiment to major class concepts.

Mod 6 Accounting Hw college essay help online: college essay help online

[INSERT TITLE HERE] 1

Running head: [INSERT TITLE HERE]

[INSERT TITLE HERE]

Student Name

Allied American University

Author Note

This paper was prepared for [INSERT COURSE NAME], [INSERT COURSE ASSIGNMENT] taught by [INSERT INSTRUCTOR’S NAME].

ACC 227: Principles of Accounting II

Module 6 Homework Assignment

Directions: Please use an Excel Spreadsheet to present your homework (note: if you have a Mac, you may use Pages). Accounting homework cannot be accomplished in Microsoft Word. Please use the presentations that have been provided with the course as reference. Also, you may use the Generic Working Papers Excel Workbook found in the Course Resources to complete this assignment. Please visit the Course Resources section. Please note that you may have additional written homework alongside these application assignments.

Please complete the following exercises found at the end Chapter 21:

Problem Set A: Problem 21-1A

Problem Set A: Problem 21-5A

Serial Problem: SP 21, Business Solutions (course-long project)

Please complete the following exercises found at the end Chapter 22:

Problem Set A: Problem 22-2A

Problem Set A: Problem 22-5A

Serial Problem: SP 22, Business Solutions (course-long project)

COURSE-LONG PROJECT DIRECTIONS: This course contains a course-long project in which you will work on a variety of problems in regards to a computer services company called Business Solutions. Each module will build upon one another, so it is important to complete each part successfully.

Please note that there are 8 total parts to the course-long project. You will have 1 week to complete each part.

This course-long project is a serial problem taken from your textbook. You can view the problem starting in Chapter 13. It will continue through Chapter 25. Please use the Generic Working Papers Excel Workbook found in the Course Resources to complete this project.

COURSE-LONG PROJECT: PART VI (Module 6)

Scenario: On October 1, 2015, Santana Rey launched a computer services company, Business Solutions, that is organized as a proprietorship and provides consulting services, computer system installations, and custom program development. Rey adopts the calendar year for reporting purposes and expects to prepare the company’s first set of financial statements on December 31, 2015.

Chapter 21: Serial Problem: SP 21, Business Solutions

Please complete the following:

Business Solutions sells upscale modular desk units and office chairs in the ratio of 3:2 (desk unit: chair). The selling prices are $1,250 per desk unit and $500 per chair. The variable costs are $750 per desk unit and $250 per chair. Fixed costs are $120,000.

Required

Compute the selling price per composite unit.

Compute the variable costs per composite unit.

Compute the break-even point in composite units.

Compute the number of units of each product that would be sold at the break-even point.

Chapter 22: Serial Problem: SP 22, Business Solutions

Please complete the following:

Santana Rey expects second-quarter 2016 sales of her new line of computer furniture to be the same as the first quarter’s sales (reported below) without any changes in strategy. Monthly sales averaged 40 desk units (sales price of $1,250) and 20 chairs (sales price of $500).

Santana Rey believes that sales will increase each month for the next three months (April, 48 desks, 32 chairs; May, 52 desks, 35 chairs; June, 56 desks, 38 chairs) if selling prices are reduced to $1,150 for desks and $450 for chairs, and advertising expenses are increased by 10% and remain at that level for all three months. The products’ variable cost will remain at $750 for desks and $250 for chairs. The sales staff will continue to earn a 10% commission, the fixed manufacturing costs per month will remain at $10,000, and other fixed expenses will remain at $6,000 per month.

Required

Prepare budgeted income statements for each of the months of April, May, and June that show the expected results from implementing the proposed changes. Use a three-column format, with one-column for each month.

Use the budgeted income statements from part 1 to recommend whether Santa Rey should implement the proposed changes. Explain.

Project Management Discussion 3 cheap mba definition essay help

Discussion: Project Planning & Selection

Identify a project that you worked on in the past (or research one online) and discuss at least four of the key decisions made during the pre-initiating and initiating processes. Do you think all necessary decisions can be made during this process? Why or why not?

Discuss your response in detail (250 words). When responding, use terminology from the module materials and provide appropriate and adequate details in all responses. Each response should be in your own words, grammatically sound, and free of spelling errors.

Using current APA format, include and cite at least one external reference material in your initial discussion post.

Discussion: Project Planning & Selection

Identify a project that you worked on in the past (

or research one online

) and discuss

at least four of the key decisions made during the pre

–

initiating and initiating

processes. Do you think all necessary

decisions can be made during this process?

Why or why not?

Discuss your response in detail (

words

). When responding, use terminology

from the module materials and provide appropriate and adequate details in all

responses. Each response should be in your own words, grammatically sound, and

free of spelling errors.

Using current

APA format,

include and cite at least one external reference material in

your initial discussion post.

Discussion: Project Planning & Selection

Identify a project that you worked on in the past (or research one online) and discuss

at least four of the key decisions made during the pre-initiating and initiating

processes. Do you think all necessary decisions can be made during this process?

Why or why not?

Discuss your response in detail (250 words). When responding, use terminology

from the module materials and provide appropriate and adequate details in all

responses. Each response should be in your own words, grammatically sound, and

free of spelling errors.

Using current APA format, include and cite at least one external reference material in

your initial discussion post.

Sat Questions college essay help online: college essay help online

Please put answers below the boxes

A politician claims that he is supported by a clear majority of voters. In a recent survey, 35 out of 51 randomly selected voters indicated that they would vote for the politician. Use a 5% significance level for the test. Use Table 1.

Select the null and the alternative hypotheses.

H0: p = 0.50; HA: p ≠ 0.50

H0: p ≤ 0.50; HA: p > 0.50

H0: p ≥ 0.50; HA: p < 0.50

Calculate the sample proportion. (Round your answer to 3 decimal places.)

Sample proportion

Calculate the value of test statistic. (Round intermediate calculations to 4 decimal places. Round your answer to 2 decimal places.)

Test statistic

Calculate the p-value of the test statistic. (Round intermediate calculations to 4 decimal places. Round “z” value to 2 decimal places and final answer to 4 decimal places.)

p-value

What is the conclusion?

Do not reject H0; the politician is not supported by a clear majority

Do not reject H0; the politician is supported by a clear majority

Reject H0; the politician is not supported by a clear majority

Reject H0; the politician is supported by a clear majority

Consider the following contingency table.

Convert the contingency table into a joint probability table. (Round your intermediate calculations and final answers to 4 decimal places.)

Total

What is the probability that A occurs? (Round your intermediate calculations and final answer to 4 decimal places.)

Probability

What is the probability that A and B occur? (Round your intermediate calculations and final answer to 4 decimal places.)

Probability

Given that B has occurred, what is the probability that A occurs? (Round your intermediate calculations and final answer to 4 decimal places.)

Probability

Given that Ac has occurred, what is the probability that B occurs? (Round your intermediate calculations and final answer to 4 decimal places.)

Probability

Are A and B mutually exclusive events?

Yes because P(A | B) ≠ P(A).

Yes because P(A ∩ B) ≠ 0.

No because P(A | B) ≠ P(A).

No because P(A ∩ B) ≠ 0.

Are A and B independent events?

Yes because P(A | B) ≠ P(A).

Yes because P(A ∩ B) ≠ 0.

No because P(A | B) ≠ P(A).

No because P(A ∩ B) ≠ 0.

A hair salon in Cambridge, Massachusetts, reports that on seven randomly selected weekdays, the number of customers who visited the salon were 72, 55, 49, 35, 39, 23, and 77. It can be assumed that weekday customer visits follow a normal distribution. Use Table 2.

Construct a 90% confidence interval for the average number of customers who visit the salon on weekdays. (Round intermediate calculations to 4 decimal places, “sample mean” and “sample standard deviation” to 2 decimal places and “t” value to 3 decimal places, and final answers to 2 decimal places.)

Confidence interval

Construct a 99% confidence interval for the average number of customers who visit the salon on weekdays. (Round intermediate calculations to 4 decimal places, “sample mean” and “sample standard deviation” to 2 decimal places and “t” value to 3 decimal places, and final answers to 2 decimal places.)

Confidence interval

What happens to the width of the interval as the confidence level increases?

As the confidence level increases, the interval becomes narrower and less precise.

As the confidence level increases, the interval becomes wider and less precise.

Consider the following sample data:

PictureClick here for the Excel Data File

Calculate b1 and b0. What is the sample regression equation? (Round intermediate calculations to 4 decimal places and final answers to 2 decimal places.)

y-hat = + x

Find the predicted value for y if x equals 12, 17, and 22. (Round intermediate coefficient values and final answers to 2 decimal places.)

y-hat

If x = 12

If x = 17

If x = 22

India is the second most populous country in the world, with a population of over 1 billion people. Although the government has offered various incentives for population control, some argue that the birth rate, especially in rural India, is still too high to be sustainable. A demographer assumes the following probability distribution of the household size in India.

Household Size

Probability

0.04

0.13

0.15

0.22

0.17

0.15

0.11

0.03

What is the probability that there are less than 5 members in a typical household in India? (Round your answer to 2 decimal places.)

Probability

What is the probability that there are 5 or more members in a typical household in India? (Round your answer to 2 decimal places.)

Probability

What is the probability that the number of members in a typical household in India is greater than 4 and less than 7 members? (Round your answer to 2 decimal places.)

Probability

Consider the following population data:

Calculate the range.

Range

Calculate MAD. (Round your intermediate calculations to 4 decimal places and final answer to 2 decimal places.)

MAD

Calculate the population variance. (Round your intermediate calculations to 4 decimal places and final answer to 2 decimal places.)

Population variance

Calculate the population standard deviation. (Round your intermediate calculations to 4 decimal places and final answer to 2 decimal places.)

Population standard deviation

On a particularly busy section of the Garden State Parkway in New Jersey, police use radar guns to detect speeders. Assume the time that elapses between successive speeders is exponentially distributed with a mean of 19 minutes.

Calculate the rate parameter λ. (Round your answer to 4 decimal places.)

Rate parameter λ

What is the probability of a waiting time less than 13 minutes between successive speeders? (Round your answer to 4 decimal places.)

Probability

What is the probability of a waiting time in excess of 27 minutes between successive speeders? (Round your answer to 4 decimal places.)

Probability

The following ANOVA table was obtained when estimating a multiple regression.

ANOVA

Significance F

Regression

188,492.30

94,246.15

60.08

4.86E-11

Residual

45,490.50

1,568.64

Total

233,982.80

Calculate the standard error of the estimate. (Round your answer to 2 decimal places.)

b-1.

Calculate the coefficient of determination. (Round your answer to 4 decimal places.)

Coefficient of determination

b-2.

Interpret the coefficient of determination.

The proportion of the variation in x that is explained by the regression model.

The proportion of the variation in y that is explained by the regression model.

Calculate adjusted R2. (Round your answer to 4 decimal places.)

Adjusted R2

In order to estimate the mean 30-year fixed mortgage rate for a home loan in the United States, a random sample of 17 recent loans is taken. The average calculated from this sample is 4.85%. It can be assumed that 30-year fixed mortgage rates are normally distributed with a standard deviation of 0.5%. Compute 90% and 95% confidence intervals for the population mean 30-year fixed mortgage rate. Use Table 1. (Round intermediate calculations to 4 decimal places, “z” value and final answers to 2 decimal places. Enter your answers as percentages, not decimals.)

Confidence Level

Confidence Interval

90%

95%

10)

Consider the following hypotheses:

H0: p ≥ 0.37

HA: p < 0.37

Which of the following sample information enables us to reject the null hypothesis at α = 0.05 and at α = 0.10? Use Table 1.

α = 0.05

α = 0.10

x = 33; n = 100

x = 80; n = 285

= 0.34; n = 58

= 0.34; n = 416

a. Reject or Do not reject

11)

In a multiple regression with two explanatory variables and 117 observations, it is found that SSR = 4.51 and SST = 8.86.

Calculate the standard error of the estimate. (Round your answer to 2 decimal places.)

Calculate the coefficient of determination R2. (Round your answer to 4 decimal places.)

Calculate adjusted R2. (Round your answer to 4 decimal places.)

Adjusted R2

12)

A retailer is looking to evaluate its customer service. Management has determined that if the retailer wants to stay competitive, then it will have to have at least a 91% satisfaction rate among its customers. Management will take corrective actions if the satisfaction rate falls below 91%. A survey of 1,450 customers showed that 1,305 were satisfied with their customer service. Use Table 1.

Select the hypotheses to test if the retailer needs to improve its services.

H0: p = 0.91; HA: p ≠ 0.91

H0: p ≥ 0.91; HA: p < 0.91

H0: p ≤ 0.91; HA: p > 0.91

What is the value of the appropriate test statistic? (Negative value should be indicated by a minus sign. Round intermediate calculations to 4 decimal places. Round your answer to 2 decimal places.)

Test statistic

Compute the p-value. (Round “z” value to 2 decimal places and final answer to 4 decimal places.)

p-value

What is the conclusion?

The management will take corrective action.

The management will not take corrective action.

13)

Consider the following hypotheses:

H0: μ = 360

HA: μ ≠ 360

The population is normally distributed with a population standard deviation of 73. Use Table 1.

Use a 10% level of significance to determine the critical value(s) of the test. (Round your answer to 2 decimal places.)

Critical value(s)

b-1.

Calculate the value of the test statistic with = 389 and n = 80. (Round intermediate calculations to 4 decimal places. Round your answer to 2 decimal places.)

Test statistic

b-2.

What is the conclusion at α = 0.10?

Do not reject H0 since the value of the test statistic is smaller than the critical value.

Do not reject H0 since the value of the test statistic is greater than the critical value.

Reject H0 since the value of the test statistic is smaller than the critical value.

Reject H0 since the value of the test statistic is greater than the critical value.

Use a 5% level of significance to determine the critical value(s) of the test. (Round your answer to 2 decimal places.)

Critical value(s)

d-1.

Calculate the value of the test statistic with = 335 and n = 80. (Negative value should be indicated by a minus sign. Round intermediate calculations to 4 decimal places. Round your answer to 2 decimal places.)

Test statistic

d-2.

What is the conclusion at α = 0.05?

Reject H0 since the value of the test statistic is not less than the negative critical value.

Reject H0 since the value of the test statistic is less than the negative critical value.

Do not reject H0 since the value of the test statistic is not less than the negative critical value.

Do not reject H0 since the value of the test statistic is less than the negative critical value.

14)

Use computer) Assume that X is a hypergeometric random variable with N = 55, S = 18, and n = 14. Calculate the following probabilities. (Round your answers to 4 decimal places.)

a. P(X = 8)

b. P(X ≥ 2)

c. P(X ≤ 4)

15)

For a sample of 41 New England cities, a sociologist studies the crime rate in each city (crimes per 100,000 residents) as a function of its poverty rate (in %) and its median income (in $1,000s). The regression results are shown.

ANOVA

Significance F

Regression

3,519,512

1,759,756.0

10.29454

5.9E-04

Residual

4,102,577

170,940.7

Total

7,622,089

Calculate the standard error of the estimate. (Round your answer to 2 decimal places.)

b-1.

What proportion of the variability in crime rate is explained by the variability in the explanatory variables? (Round your answer to 4 decimal places.)

Explained proportion

b-2.

What proportion is unexplained? (Round your answer to 4 decimal places.)

Unexplained proportion

16)

Consider the following simple linear regression results based on 20 observations. Use Table 2.

Coefficients

Standard Error

t Stat

p-value

Lower 95%

Upper 95%

Intercept

33.8605

4.4081

7.6814

0.0000

24.60

43.12

0.3634

0.1204

3.0183

0.0074

0.11

0.62

a-1.

Choose the hypotheses to determine if the intercept differs from zero.

H0: β0 ≥ 0; HA: β0 < 0

H0: β0 ≤ 0; HA: β0 > 0

H0: β0 = 0; HA: β0 ≠ 0

a-2.

At the 5% significance level, what is the conclusion to the hypothesis test? Does the intercept differ from zero?

Do not reject H0Picture the intercept is greater than zero.

Reject H0Picture the intercept is greater than zero.

Reject H0Picture the intercept differs from zero.

Do not reject H0Picture the intercept differs from zero.

b-1.

Construct the 95% confidence interval for the slope coefficient. (Negative values should be indicated by a minus sign. Round your intermediate calculations to 4 decimal places,”tα/2,df” value to 3 decimal places and final answers to 2 decimal places.)

Confidence interval

b-2.

At the 5% significance level, does the slope differ from zero?

Yes, since the interval does not contain zero.

No, since the interval contains zero.

Yes, since the interval contains zero.

No, since the interval does not contain zero.

17)

Consider the following hypotheses:

H0: μ = 33

HA: μ ≠ 33

The population is normally distributed. A sample produces the following observations:

Use the p-value approach to conduct the test at a 5% level of significance. Use Table 2.

PictureClick here for the Excel Data File

Find the mean and the standard deviation. (Round intermediate calculations to 4 decimal places. Round your answers to 2 decimal places.)

Mean

Standard deviation

Calculate the value of the test statistic. (Round intermediate calculations to 4 decimal places. Round your answer to 2 decimal places.)

Test statistic

Approximate the p-value of the test statistic.

0.05 < p-value < 0.10

p-value > 0.20

0.10 < p-value < 0.20

What is the conclusion?

Reject H0 since the p-value is greater than α.

Reject H0 since the p-value is smaller than α.

Do not reject H0 since the p-value is greater than α.

Do not reject H0 since the p-value is smaller than α.

18)

Let P(A) = 0.59, P(B) = 0.24, and P(A ∩ B) = 0.14.

Calculate P(A | B). (Round your answer to 2 decimal places.)

P(A | B)

Calculate P(A U B). (Round your answer to 2 decimal places.)

P(A U B)

Calculate P((A U B)c). (Round your answer to 2 decimal places.)

P((A U B)c)

19)

The time required to assemble an electronic component is normally distributed with a mean and a standard deviation of 34 minutes and 20 minutes, respectively. Use Table 1.

Find the probability that a randomly picked assembly takes between 26 and 40 minutes. (Round “z” value to 2 decimal places and final answer to 4 decimal places.)

Probability

It is unusual for the assembly time to be above 56 minutes or below 13 minutes. What proportion of assembly times fall in these unusual categories? (Round “z” value to 2 decimal places and final answer to 4 decimal places.)

Proportion of assembly times

20)

Christine has always been weak in mathematics. Based on her performance prior to the final exam in Calculus, there is a 55% chance that she will fail the course if she does not have a tutor. With a tutor, her probability of failing decreases to 25%. There is only a 65% chance that she will find a tutor at such short notice.

What is the probability that Christine fails the course? (Round your answer to 4 decimal places.)

Probability

Christine ends up failing the course. What is the probability that she had found a tutor? (Round your answer to 4 decimal places.)

Probability

21)

Consider the following returns for two investments, A and B, over the past four years:

Investment 1:

13%

–2%

Investment 2:

10%

–8%

13%

a-1.

Calculate the mean for each investment. (Round your answers to 2 decimal places.)

Mean

Investment 1

percent

Investment 2

percent

a-2.

Which investment provides the higher return?

Investment 2

Investment 1

b-1.

Calculate the standard deviation for each investment. (Round your answers to 2 decimal places.)

Standard Deviation

Investment 1

Investment 2

b-2.

Which investment provides less risk?

Investment 1

Investment 2

c-1.

Given a risk-free rate of 1.2%, calculate the Sharpe ratio for each investment. (Do not round intermediate calculations. Round your answers to 2 decimal places.)

Sharpe Ratio

Investment 1

Investment 2

c-2.

Which investment has performed better?

Investment 2

Investment 1

22)

Market observers are quite uncertain whether the stock market has bottomed out from the economic meltdown that began in 2008. In an interview on March 8, 2009, CNBC interviewed two prominent economists who offered differing views on whether the U.S. economy was getting stronger or weaker. An investor not wanting to miss out on possible investment opportunities considers investing $20,000 in the stock market. He believes that the probability is 0.30 that the market will improve, 0.37 that it will stay the same, and 0.33 that it will deteriorate. Further, if the economy improves, he expects his investment to grow to $28,000, but it can also go down to $17,000 if the economy deteriorates. If the economy stays the same, his investment will stay at $20,000.

What is the expected value of his investment?

Expected value

What should the investor do if he is risk neutral?

Investor invest the $20,000.

Is the decision clear-cut if he is risk averse?

Yes

23)

A car manufacturer is concerned about poor customer satisfaction at one of its dealerships. The management decides to evaluate the satisfaction surveys of its next 66 customers. The dealer will be fined if the number of customers who report favorably is between 26 and 33. The dealership will be dissolved if fewer than 26 report favorably. It is known that 62% of the dealer’s customers report favorably on satisfaction surveys. Use Table 1.

What is the probability that the dealer will be fined? (Round intermediate calculations to 4 decimal places, “z” value to 2 decimal places, and final answer to 4 decimal places.)

Probability

What is the probability that the dealership will be dissolved? (Round intermediate calculations to 4 decimal places, “z” value to 2 decimal places, and final answer to 4 decimal places.)

Probability

24)

The historical returns on a balanced portfolio have had an average return of 10% and a standard deviation of 14%. Assume that returns on this portfolio follow a normal distribution. Use the empirical rule for normal distributions to answer the following questions.

What percentage of returns were greater than 38%? (Round your answer to 1 decimal place.)

Percentage of returns

What percentage of returns were below −18%? (Round your answer to 1 decimal place.)

Percentage of returns

25)

A machine that is programmed to package 5.35 pounds of cereal is being tested for its accuracy. In a sample of 16 cereal boxes, the sample mean filling weight is calculated as 5.35 pounds. It can be assumed that filling weights are normally distributed with a population standard deviation of 0.04 pound. Use Table 1.

a-1.

Identify the relevant parameter of interest for these quantitative data.

The parameter of interest is the proportion filling weight of all cereal packages.

The parameter of interest is the average filling weight of all cereal packages.

a-2.

Compute the point estimate as well as the margin of error with 95% confidence. (Round intermediate calculations to 4 decimal places. Round “z” value and final answers to 2 decimal places.)

Point estimate

Margin of error

b-1.

Calculate the 95% confidence interval. (Use rounded margin of error. Round your answers to 2 decimal places.)

Confidence interval

b-2.

Can we conclude that the packaging machine is operating improperly?

Yes, since the confidence interval contains the target filling weight of 5.35.

Yes, since the confidence interval does not contain the target filling weight of 5.35.

No, since the confidence interval contains the target filling weight of 5.35.

No, since the confidence interval does not contain the target filling weight of 5.35.

How large a sample must we take if we want the margin of error to be at most 0.01 pound with 95% confidence? (Round intermediate calculations to 4 decimal places. Round “z” value to 2 decimal places and round up your final answer to the next whole number.)

Sample size

26)

Consider the following hypotheses:

H0: μ ≥ 100

HA: μ < 100

The population is normally distributed. A sample produces the following observations:

100

102

Use the critical value approach to conduct the test at a 5% level of significance. Use Table 2.

Find the mean and the standard deviation. (Round intermediate calculations to 4 decimal places. Round your answers to 2 decimal places.)

Mean

Standard deviation

Calculate the value of the test statistic. (Negative value should be indicated by a minus sign. Round intermediate calculations to 4 decimal places. Round your answer to 2 decimal places.)

Test statistic

Calculate the critical value of the test statistic. (Negative value should be indicated by a minus sign. Round intermediate calculations to 4 decimal places. Round your answer to 3 decimal places.)

Critical value

What is the conclusion?

Do not reject H0 since the value of the test statistic is less than the negative critical value.

Do not reject H0 since the value of the test statistic is not less than the negative critical value.

Reject H0 since the value of the test statistic is less than the negative critical value.

Reject H0 since the value of the test statistic is not less than the negative critical value.

27)

In a simple linear regression, the following information is given:

= − 23; = 42;

Calculate b1. (Negative value should be indicated by a minus sign. Round your answer to 2 decimal places.)

Calculate b0. (Round intermediate calculations to 4 decimal places and final answer to 2 decimal places.)

c-1.

What is the sample regression equation? (Negative value should be indicated by a minus sign. Round your answers to 2 decimal places.)

y-hat = + x

c-2.

Predict y if x equals −22.(Round intermediate coefficient values and final answer to 2 decimal places.)

y-hat

28)

Using data from 50 workers, a researcher estimates Wage = β0 + β1 Education + β2 Experience +β3 Age + ε, where Wage is the hourly wage rate and Education, Experience, and Age are the years of higher education, the years of experience, and the age of the worker, respectively. A portion of the regression results is shown in the following table.

Coefficients

Standard Error

t Stat

p-value

Intercept

7.27

3.99

1.43

0.0629

Education

1.03

0.37

3.54

0.0001

Experience

0.43

0.11

3.23

0.0020

Age

−0.01

0.06

−0.10

0.7920

a-1.

What is the point estimate for β1?

1.03

0.43

a-2.

Interpret this value.

As Education increases by 1 unit, Wage is predicted to increase by 1.03 units.

As Education increases by 1 unit, Wage is predicted to increase by 0.43 units, holding Age and Experience constant.

As Education increases by 1 unit, Wage is predicted to increase by 1.03 units, holding Age and Experience constant.

As Education increases by 1 unit, Wage is predicted to increase by 0.43 units.

a-3.

What is the point estimate for β2?

0.43

1.03

a-4.

Interpret this value.

Same interpretation by using 1.03 or -0.01

As Experience increases by 1 unit, Wage is predicted to increase by 0.43 units, holding Age and Education constant.

What is the sample regression equation? (Negative value should be indicated by a minus sign. Round your answers to 2 decimal places.)

y-hat = + Education + Experience + Age

What is the predicted value for Age = 38, Education = 3 and Experience = 5. (Do not round intermediate calculations. Round your answer to 2 decimal places.)

y-hat

29)

Suppose that the average IQ score is normally distributed with a mean of 115 and a standard deviation of 11. In addition to providing the answer, state the relevant Excel commands. (Use Excel)

What is the probability a randomly selected person will have an IQ score of less than 89? (Round your answer to 4 decimal places.)

Probability

What is the probability that a randomly selected person will have an IQ score greater than 125? (Round your answer to 4 decimal places.)

Probability

What minimum IQ score does a person have to achieve to be in the top 2.6% of IQ scores? (Round your answer to 2 decimal places.)

Minimum IQ score

30)

Consider the following frequency distribution.

Class

Frequency

2 up to 4

4 up to 6

6 up to 8

8 up to 10

Calculate the population mean. (Round your answer to 2 decimal places.)

Population mean

Calculate the population variance and the population standard deviation. (Round your intermediate calculations to 4 decimal places and final answers to 2 decimal places.)

Population variance

Population standard deviation

31)

Acceptance sampling is an important quality control technique, where a batch of data is tested to determine if the proportion of units having a particular attribute exceeds a given percentage. Suppose that 15% of produced items are known to be nonconforming. Every week a batch of items is evaluated and the production machines are adjusted if the proportion of nonconforming items exceeds 19%. Use Table 1.

What is the probability that the production machines will be adjusted if the batch consists of 68 items? (Round intermediate calculations to 4 decimal places, “z” value to 2 decimal places, and final answer to 4 decimal places.)

Probability

What is the probability that the production machines will be adjusted if the batch consists of 136 items? (Round intermediate calculations to 4 decimal places, “z” value to 2 decimal places, and final answer to 4 decimal places.)

Probability

32)

Assume that X is a binomial random variable with n = 27 and p = 0.92. Calculate the following probabilities. (Round your intermediate and final answers to 4 decimal places.)

a. P(X = 26)

b. P(X = 25)

c. P(X ≥ 25)

33)

A social scientist would like to analyze the relationship between educational attainment and salary. He collects the following sample data, where Education refers to years of higher education and Salary is the individual’s annual salary in thousands of dollars:

Education

Salary

$39

107

PictureClick here for the Excel Data File

Find the sample regression equation for the model: Salary = β0 + β1Education + ε. (Round intermediate calculations to 4 decimal places. Enter your answers in thousands rounded to 2 decimal places.)

+ Education

Interpret the coefficient for education.

As Education increases by 1 unit, an individual’s annual salary is predicted to increase by $7,000.

As Education increases by 1 unit, an individual’s annual salary is predicted to increase by $8,000.

As Education increases by 1 unit, an individual’s annual salary is predicted to decrease by $7,000.

As Education inceases by 1 unit, an individual’s annual salary is predicted to decrease by $8,000.

What is the predicted salary for an individual who completed 7 years of higher education? (Round intermediate coefficient values to 2 decimal places and final answer, in dollars, to the nearest whole number.)

34)

A sample of patients arriving at Overbrook Hospital’s emergency room recorded the following body temperature readings over the weekend:

99.0

100.4

99.7

100.4

99.1

101.7

100.9

100.5

99.3

101.9

100.4

101.9

100.5

99.4

102.7

99.4

100.9

100.1

100.7

100.2

PictureClick here for the Excel Data File

Construct a stem-and-leaf diagram.

Stem

Leaf

Interpret the stem-and-leaf diagram.

The distribution is symmetric.

The distribution is Positively Skewed.

The distribution is Negatively Skewed.

35)

A manager of a local retail store analyzes the relationship between advertising and sales by reviewing the store’s data for the previous six months.

Advertising (in $100s)

Sales (in $1,000s)

198

122

200

124

160

130

PictureClick here for the Excel Data File

Calculate the mean of advertising and the mean of sales. (Round your answers to 2 decimal places.)

Mean

Advertising

Sales

Calculate the standard deviation of advertising and the standard deviation of sales. (Round your answers to 2 decimal places.)

Standard Deviation

Advertising

Sales

c-1.

Calculate the covariance between advertising and sales. (Round your answer to 2 decimal places.)

Covariance

c-2.

Interpret the covariance between advertising and sales.

Positive correlation

Negative correlation

No correlation

d-1.

Calculate the correlation coefficient between advertising and sales. (Round your answer to 2 decimal places.)

Correlation coefficient

d-2.

Interpret the correlation coefficient between advertising and sales.

Strong positive correlation

Weak negative correlation

Weak positive correlation

No correlation

Strong negative correlation

36)

The monthly closing stock prices (rounded to the nearest dollar) for Panera Bread Co. for the first six months of 2010 are reported in the following table. Use Table 2.

Months

Closing Stock Price

January 2010

$200

February 2010

205

March 2010

208

April 2010

207

May 2010

209

June 2010

204

SOURCE: http://finance.yahoo.com.

Calculate the sample mean and the sample standard deviation. (Round intermediate calculations to 4 decimal places and “sample mean” and “sample standard deviation” to 2 decimal places.)

Sample mean

Sample standard deviation

Compute the 90% confidence interval for the mean stock price of Panera Bread Co., assuming that the stock price is normally distributed. (Round “t” value to 3 decimal places, and final answers to 2 decimal places.)

Confidence interval

What happens to the margin of error if a higher confidence level is used for the interval estimate?

The margin of error decreases as the confidence level increases.

The margin of error increases as the confidence level increases.

37)

Complete the following probability table. (Round Prior Probability answers to 2 decimal places and intermediate calculations and other answers to 4 decimal places.)

Prior Probability

Conditional Probability

Joint Probability

Posterior Probability

P(B)

0.49

P(A | B)

0.10

P(A ∩ B )

P(B | A)

P(Bc)

P(A | Bc)

0.34

P(A ∩ Bc)

P(Bc | A)

Total

P(A)

Total

38)

A local restaurant is committed to providing its patrons with the best dining experience possible. On a recent survey, the restaurant asked patrons to rate the quality of their entrées. The responses ranged from 1 to 5, where 1 indicated a disappointing entrée and 5 indicated an exceptional entrée.

The results of the survey are as follows:

PictureClick here for the Excel Data File

Construct frequency and relative frequency distributions that summarize the survey’s results. (Do not round intermediate calculations. Round “relative frequency” to 3 decimal places.)

Rating

Frequency

Relative Frequency

Total

Are patrons generally satisfied with the quality of their entrées?

Yes

39)

At a new exhibit in the Museum of Science, people are asked to choose between 71 or 200 random draws from a machine. The machine is known to have 88 green balls and 82 red balls. After each draw, the color of the ball is noted and the ball is put back for the next draw. You win a prize if more than 58% of the draws result in a green ball. Use Table 1.

Calculate the probability of getting more than 58% green balls.(Round intermediate calculations to 4 decimal places, “z” value to 2 decimal places, and final answer to 4 decimal places.)

Probability

200

Would you choose 71 or 200 draws for the game?

71 balls

200 balls

40)

A construction company in Naples, Florida, is struggling to sell condominiums. In order to attract buyers, the company has made numerous price reductions and better financing offers. Although condominiums were once listed for $350,000, the company believes that it will be able to get an average sale price of $255,000. Let the price of these condominiums in the next quarter be normally distributed with a standard deviation of $17,000. Use Table 1.

What is the probability that the condominium will sell at a price (i) Below $231,000?, (ii) Above $293,000? (Round “z” value to 2 decimal places and final answer to 4 decimal places.)

Probability

Below $231,000

Above $293,000

The company is also trying to sell an artist’s condo. Potential buyers will find the unusual features of this condo either pleasing or objectionable. The manager expects the average sale price of this condo to be the same as others at $255,000, but with a higher standard deviation of $21,000. What is the probability that this condo will sell at a price (i) Below $231,000?, (ii) Above $293,000? (Round your answers to 4 decimal places.)

Probability

Below $231,000

Above $293,000

41)

A random variable X is exponentially distributed with a mean of 0.17.

a-1.

What is the rate parameter λ? (Round your answer to 3 decimal places.)

Rate parameter λ

a-2.

What is the standard deviation of X? (Round your answer to 3 decimal places.)

Standard deviation X

Compute P(X > 0.30). (Round intermediate calculations to 4 decimal places and final answer to 4 decimal places.)

P(X > 0.30)

Compute P(0.10 ≤ X ≤ 0.30). (Round intermediate calculations to 4 decimal places and final answer to 4 decimal places.)

P(0.10 ≤ X ≤ 0.30)

42)

Professor Sanchez has been teaching Principles of Economics for over 25 years. He uses the following scale for grading.

Grade

Numerical Score

Probability

0.140

0.200

0.430

0.125

0.105

Part (a) omitted

Convert the above probability distribution to a cumulative probability distribution. (Round your answers to 3 decimal places.)

Grade

P(X ≤ x)

What is the probability of earning at least a B in Professor Sanchez’s course? (Round your answer to 3 decimal places.)

Probability

What is the probability of passing Professor Sanchez’s course? (Round your answer to 3 decimal places.)

Probability

43)

The scheduled arrival time for a daily flight from Boston to New York is 9:30 am. Historical data show that the arrival time follows the continuous uniform distribution with an early arrival time of 9:16 am and a late arrival time of 9:56 am.

After converting the time data to a minute scale, calculate the mean and the standard deviation for the distribution. (Round your answers to 2 decimal places.)

Mean

minutes

Standard deviation

minutes

What is the probability that a flight arrives late (later than 9:30 am)? (Do not round intermediate calculations. Round your answer to 2 decimal places.)

Probability

44) Regression analysis can be used to analyze how a change in one variable impacts the other variable, such as an increase in marketing budget increasing sales. Find a unique area of your life where one variable impacts the other variable (and that are both measurable) and do a regression analysis on it. Be sure to include the coefficient of determination as well as the test of significance.

45)

Consider the following hypotheses:

H0: μ ≥ 201

HA: μ < 201

A sample of 80 observations results in a sample mean of 198. The population standard deviation is known to be 20. Use Table 1.

What is the critical value for the test with α = 0.05 and with α = 0.01? (Negative values should be indicated by a minus sign. Round your answers to 2 decimal places.)

Critical Value

α = 0.05

α = 0.01

b-1.

Calculate the value of the test statistic. (Negative value should be indicated by a minus sign. Round intermediate calculations to 4 decimal places. Round your answer to 2 decimal places.)

Test statistic

b-2.

Does the above sample evidence enable us to reject the null hypothesis at α = 0.05?

No since the value of the test statistic is not less than the negative critical value.

Yes since the value of the test statistic is less than the negative critical value.

Yes since the value of the test statistic is not less than the negative critical value.

No since the value of the test statistic is less than the negative critical value.

Does the above sample evidence enable us to reject the null hypothesis at α = 0.01?

No since the value of the test statistic is not less than the negative critical value.

Yes since the value of the test statistic is less than the negative critical value.

Yes since the value of the test statistic is not less than the negative critical value.

No since the value of the test statistic is less than the negative critical value.

(Click to select)

Explain Genre Theory And, Using Chapter 4 Of The Text As A Reference, Thoroughly Describe The Conventions And Attributes Of Your Selected Genre. persuasive essay help

After reviewing the discussion of genre in Chapter 4 of Film: From Watching to Seeing, demonstrate your understanding of one selected genre using a feature-length film.

Note: Several films are listed in Chapter 4 as emblematic of a specific genre. You are allowed to choose a film or genre not mentioned in Chapter 4, but you are strongly encouraged to email your professor to receive approval before doing so.

In 800 to 1200 words:

Explain genre theory and, using Chapter 4 of the text as a reference, thoroughly describe the conventions and attributes of your selected genre.

Identify a feature-length film that fits this genre and provide a basic summary of the movie. As you develop this summary, remember the differences between a film’s story and a film’s plot and how these differences can lead to the inclusion of genre elements.

Interpret at least two genre conventions exhibited in your chosen feature-length film that help classify it in the selected genre. Be sure to provide a specific example of each convention (e.g., a particular scene or plot component).

Provide an example of a third convention from your chosen feature-length film and explain how this convention expands the boundaries of the specified genre.

Your paper should be organized around a thesis statement that focuses on how your chosen feature-length film both aligns with and expands upon your chosen genre.

The paper must be 800 to 1200 words in length (excluding title and reference pages), and formatted according to APA style as outlined in the Ashford Writing Center.

You must use at least two scholarly sources other than the textbook to support your claims. Refer to the ENG225 Research Guide in the Ashford University Library for guidance and to locate your sources. Cite your sources (including the feature-length film) within the text of your paper and on the reference page. For information regarding APA, including samples and tutorials, visit the Ashford Writing Center.

Accounting Homework buy essay help

NetPerks Co. establishes a $200 petty cash fund on January 1. On January 8, the fund shows $28 in cash along with receipts for the following expenditures: postage, $64; transportation-in, $19; delivery expenses, $36; and miscellaneous expenses, $53. NetPerks uses the perpetual system in accounting for merchandise inventory.

Match each description with a document in a voucher system.

Description Document

A document used to notify the appropriate persons that ordered goods have arrived, including a description of the quantities and condition of goods.

An internal file used to store documents and information to control cash disbursements and to ensure that a transaction is properly authorized and recorded.

A document used to place an order with a vendor that authorizes the vendor to ship ordered merchandise at the stated price and terms.

A checklist of steps necessary for the approval of an invoice for recording and payment; also known as a check authorization.

A document used by department managers to inform the purchasing department to place an order with a vendor.

An itemized statement of goods prepared by the vendor listing the customer’s name, items sold, sales prices, and terms of sale.

Frederick Clinic deposits all cash receipts on the day when they are received and it makes all cash payments by check. At the close of business on June 30, 2011, its Cash account shows a $15,141 debit balance. Frederick Clinic’s June 30 bank statement shows $14,275 on deposit in the bank.

a. Outstanding checks as of June 30 total $2,500.

The June 30 bank statement included a $125 debit memorandum for bank services.

Check No. 919, listed with the canceled checks, was correctly drawn for $645 in payment of a utility bill on June 15. Frederick Clinic mistakenly recorded it with a debit to Utilities Expense and a credit to Cash in the amount of $654.

The June 30 cash receipts of $3,250 were placed in the bank’s night depository after banking hours and were not recorded on the June 30 bank statement.

Prepare the adjusting journal entries that Frederick Clinic must record as a result of preparing the bank reconciliation. (Omit the “$” sign in your response.)

[The following information applies to the questions displayed below.]

USA Imports uses the perpetual system in accounting for merchandise inventory and had the following transactions during the month of October.

Oct. 2

Purchased merchandise at a $4,000 price, invoice dated October 2, terms 2/10, n/30.

Received a $400 credit memorandum (at full invoice price) for the return of merchandise that it purchased on October 2.

Purchased merchandise at a $4,400 price, invoice dated October 16, terms 2/10, n/30.

Paid for the merchandise purchased on October 17, less the discount.

Paid for the merchandise purchased on October 2. Payment was delayed because the invoice was mistakenly filed for payment today. This error caused the discount to be lost.

(a) Prepare entries to record the above transactions assuming that USA Imports records invoices at gross amounts. (Omit the “$” sign in your response.)

(b)

Prepare entries to record the above transactions assuming that USA Imports records invoices at net amounts. (Omit the “$” sign in your response.)

ACCT 131 Chapter 1 Homework essay help cheap: essay help cheap

A review of the accounting records of Rayford Manufacturing indicated that the company incurred the following payroll costs during the month of September.

1. Salary of the company president—$33,000.

2. Salary of the vice president of manufacturing—$15,500.

3. Salary of the chief financial officer—$19,700.

4. Salary of the vice president of marketing—$14,800.

5. Salaries of middle managers (department heads, production supervisors) in manufacturing

plant—$203,000.

6. Wages of production workers—$943,000.

7. Salaries of administrative secretaries—$111,000.

8. Salaries of engineers and other personnel responsible for maintaining production equipment— $176,000.

9. Commissions paid to sales staff—$246,000.

Required:

What amount of payroll cost would be classified as selling, general, and administrative expense? (Omit the “$” sign in your response.)

Assuming that Rayford made 3,200 units of product and sold 2,880 of them during the month of September, determine the amount of payroll cost that would be included in cost of goods sold. (Omit the “$” sign in your response.)

Howle Manufacturing Company began operations on January 1. During the year, it started and completed 1,640 units of product. The company incurred the following costs.

1. Raw materials purchased and used—$3,240.

2. Wages of production workers—$3,520.

3. Salaries of administrative and sales personnel—$1,950.

4. Depreciation on manufacturing equipment—$4,392.

5. Depreciation on administrative equipment—$1,755.

Howle sold 1,080 units of product.

Required:

Determine the total product cost for the year.

Determine the total cost of the ending inventory. (Do not round intermediate calculations. Omit the “$” sign in your response.)

Determine the total of cost of goods sold. (Do not round intermediate calculations. Omit the “$” sign in your response.)

Each of the following events describes acquiring an asset that requires a year-end adjusting entry.

Paid $15,400 cash on January 1 to purchase computer equipment to be used for administrative purposes. The equipment had an estimated expected useful life of five years and a $1,900 salvage value.

Paid $15,400 cash on January 1 to purchase manufacturing equipment. The equipment had an estimated expected useful life of four years and a $1,900 salvage value.

3. Paid $19,200 cash in advance on May 1 for a one-year rental contract on administrative offices.

4. Paid $19,200 cash in advance on May 1 for a one-year rental contract on manufacturing facilities.

Paid $3,000 cash to purchase supplies to be used by the marketing department. At the end of the year, $490 of supplies was still on hand.

Paid $3,000 cash to purchase supplies to be used in the manufacturing process. At the end of the year, $490 of supplies was still on hand.

Required:

How the adjusting entry affects the amount of net income shown on the year-end financial statements. Assume a December 31 annual closing date. The first event has been recorded as an example. Assume that any products that have been made have not been sold. (If there is no effect select “NA” from dropdown.)

During 2011, Gallo Manufacturing Company incurred $45,000,000 of research and development (R&D) costs to create a long-life battery to use in computers. In accordance with FASB standards, the entire R&D cost was recognized as an expense in 2011. Manufacturing costs (direct materials, direct labor, and overhead) are expected to be $262 per unit. Packaging, shipping, and sales commissions are expected to be $60 per unit. Gallo expects to sell 1,000,000 batteries before new research renders the battery design technologically obsolete. During 2011, Gallo made 433,000 batteries and sold 409,000 of them.

Required:

a. Identify the upstream and downstream costs.

Determine the amount of cost of goods sold and the ending inventory balance for the year 2011. (Omit the “$” sign in your response.)

Determine the sales price assuming that Gallo desires to earn a profit margin that is equal to 25 percent of the total cost of developing, making, and distributing the batteries. (Round your answer to 2 decimal places. Omit the “$” sign in your response.)

Prepare an income statement for 2011. Use the sales price developed in part c. (Amounts to be deducted and loss amounts should be indicated with minus sign. Do not round your intermediate calculations. Omit the “$” sign in your response.)

The CFO of the Rigney Microscope Corporation intentionally misclassified a downstream transportation expense in the amount of $64,687,500 as a product cost in an accounting period when the company made 11,500 microscopes and sold 7,400 microscopes. Rigney rewards its officers with bonuses that are based on net earnings.

Required:

Indicate whether the elements on the financial statements (i.e., assets, liabilities, retained earnings, expense, and net income) would be overstated or understated as a result of the downstream transportation expense. Determine the amount of the overstatement or understatement for each element. (Leave no cells blank – be certain to enter “0” wherever required. Omit the “$” sign in your response.)

Jolly Manufacturing Company was started on January 1, 2011, when it acquired $14,000 cash by issuing common stock. Jolly immediately purchased office furniture and manufacturing equipment costing $9,100 and $34,300, respectively. The office furniture had a five-year useful life and a zero salvage value. The manufacturing equipment had a $3,500 salvage value and an expected useful life of four years. The company paid $11,900 for salaries of administrative personnel and $15,000 for wages to production personnel. Finally, the company paid $13,780 for raw materials that were used to make inventory. All inventory was started and completed during the year. Jolly completed production on 4,800 units of product and sold 3,820 units at a price of $15 each in 2011. (Assume that all transactions are cash transactions.)

Required:

Determine the total product cost and the average cost per unit of the inventory produced in 2011. (Round your average cost per unit to 2 decimal places. Omit the “$” sign in your response.)

Determine the amount of cost of goods sold that would appear on the 2011 income statement. (Do not round intermediate calculations. Round your answer to the nearest dollar amount. Omit the “$” sign in your response.)

Determine the amount of the ending inventory balance that would appear on the December 31, 2011, balance sheet. (Do not round intermediate calculations. Round your answer to the nearest dollar amount. Omit the “$” sign in your response.)

Determine the amount of net income that would appear on the 2011 income statement. (Omit the “$” sign in your response.)

Determine the amount of retained earnings that would appear on the December 31, 2011, balance sheet.(Omit the “$” sign in your response.)

Determine the amount of total assets that would appear on the December 31, 2011, balance sheet.(Omit the “$” sign in your response.)

The following transactions pertain to 2012, the first-year operations of Hall Company. All inventory was started and completed during 2012. Assume that all transactions are cash transactions.

1. Acquired $4,200 cash by issuing common stock.

2. Paid $680 for materials used to produce inventory.

3. Paid $1,860 to production workers.

4. Paid $730 rental fee for production equipment.

5. Paid $100 to administrative employees.

6. Paid $117 rental fee for administrative office equipment.

7. Produced 300 units of inventory of which 200 units were sold at a price of $13 each.

Required:

Prepare an income statement and a balance sheet. (Be sure to list the assets and liabilities in order of their liquidity. Do not round intermediate calculations. Round your answers to the nearest dollar amount. Amounts to be deducted and loss amounts should be indicated with minus sign. Omit the “$” sign in your response.)

Question 5 history essay help

A project has an initial cost of $40,000, expected net cash inflows of $9,000 per year for 7 years, and a cost of capital of 11%. What is the project’s NPV? (Hint: Begin by constructing the timeline)

10-2 – IRR

Refer to problem 10-1. What is the project’s IRR?

10-3 – MIRR

Refer to problem 10-1. What is the project’s MIRR?

10-4 – Profitability Index

Refer to problem 10-1. What is the project’s PI?

10-5 – Payback

Refer to problem 10-1. What is the project payback period?

10-6 – Discounted payback

Refer to problem 10-1. What is the project discounted payback period?

10-7 – NPV

Your division is considering two investment projects, each of which requires an up-front expenditure of $15 million. You estimate that the investments will produce the following net cash flows:

YEAR PROJECT A PROJECT B

1 $ 5,000,000 $20,000,000

2 10,000,000 10,000,000

3 20,000,000 6,000,000

A. What are the two projects’ net present values, assuming the cost of capital is:

a) 5%?

b) 10%?

c) 15%?

B. What are the two project’s IRRs at the same cost of capital?

Accounting Week 4 Quiz essay help websites: essay help websites

Question 1

1. Inventory values calculated using variable costing as opposed to absorption costing will generally be

equal.

less.

greater.

twice as much.

2 points

Question 2

Figure 7-5.Rizzo Manufacturing produces two types of cameras: 35mm and digital. The cameras are produced using one continuous process. Four activities have been identified: machining, setups, receiving, and packing. Resource drivers have been used to assign costs to each activity. The overhead activities, their costs, and the other related data are as follows:

Product Machine Hours Setups Receiving Orders Packing Orders

35mm 10,000 100 200 400

Digital 10,000 250 800 2,000

Costs $60,000 $40,000 $8,000 $24,000

Refer to Figure 7-5. Calculate a consumption ratio for setups on the digital cameras.

0.688

0.730

0.700

0.714

0.500

2 points

Question 3

Figure 8-9.The following information pertains to Stark Corporation:

Beginning inventory 0 units

Ending inventory 5,000 units

Direct labor per unit $20

Direct materials per unit 16

Variable overhead per unit 4

Fixed overhead per unit 10

Variable selling costs per unit 12

Fixed selling costs per unit 16

Refer to Figure 8-9. What is the value of ending inventory using the variable costing method?

$310,000

$250,000

$200,000

$390,000

2 points

Question 4

Figure 8-3.Martin Company uses 625 units of a part each year. The cost of placing one order is $8; the cost of carrying one unit in inventory for a year is $4. Refer to Figure 8-3. Martin has decided to begin ordering 40 units at a time. What is the average annual carrying cost of Martin’s new policy?

$80

$60

$160

$90

2 points

Question 5

Figure 7-3.Hamilton Company manufactures engines. Hamilton produces all the parts necessary for its engines except for one electronic component, which is purchased from two local suppliers: Traynor Inc. and Bello Company. Both suppliers are reliable and rarely deliver late; however, Traynor sells the component for $10.00 per unit and Bello sells the same component for $8.95. Hamilton purchases 70% of its components from Bello, because of the lower price. The total annual demand is 75,000 units.

I. Activity Data

Activity Cost

Inspecting components (sampling only) $ 190,000

Reworking products (due to failed component) $2,254,000

Warranty work (due to failed component) $1,723,000

II. Supplier Data

Traynor Bello

Inc. Company

Unit Purchase Price $10.00 $8.95

Units Purchased 22,500 52,500

Sampling Hours 50 2,450

Rework hours 135 3,625

Warranty hours 475 6,000

Refer to Figure 7-3. Calculate the total activity cost per component associated with using Traynor Inc., as the supplier.

$15.75

$10.00

$19.38

$20.00

$22.80

2 points

Question 6

I. Activity Data

Activity Cost

Inspecting components (sampling only) $ 190,000

Reworking products (due to failed component) $2,254,000

Warranty work (due to failed component) $1,723,000

II. Supplier Data

Traynor Bello

Inc. Company

Unit Purchase Price $10.00 $8.95

Units Purchased 22,500 52,500

Sampling Hours 50 2,450

Rework hours 135 3,625

Warranty hours 475 6,000

Refer to Figure 7-3. Calculate the activity rate for reworking products based on rework hours. Round to the nearest whole dollar.

$599 per hour

$595 per hour

$602 per hour

$605 per hour

$622 per hour

2 points

Question 7

The inventory cost that can include lost sales, cost of expediting, and cost of interrupted production is called

ordering cost.

carrying cost.

stockout cost.

setup cost.

storing cost.

2 points

Question 8

To calculate an activity rate, the ____ of each activity must be determined.

practical capacity

expenditure level

processing ratio

value

2 points

Question 9

Activity-based management attempts to

identify and eliminate all unnecessary activities.

increase the efficiency of necessary activities.

add new activities that increase value.

do all of these.

2 points

Question 10

Which of the following is not a traditional reason for carrying inventory?

to satisfy customer demand

to avoid shutting down manufacturing facilities

to buffer against unreliable production processes

to hedge against future price increases

all of these are traditional reasons for carrying inventory

2 points

Question 11

Figure 8-5.Sanders Company has the following information for last year:

Selling price $190 per unit

Variable production costs $52 per unit produced

Variable selling and admin. expenses $18 per unit sold

Fixed production costs $240,000

Fixed selling and admin. expenses $180,000

Units produced 12,000

Units sold 7,000

There were no beginning inventories. Refer to Figure 8-5. What is the income for Sanders using the absorption costing method?

$520,000

$480,000

$1,200,000

$500,000

2 points

Question 12

Complying with the filing requirements of the IRS is an example of a

recreational activity.

discretionary activity.

recommended activity.

required activity.

2 points

Question 13

Figure 7-4.Honeydew Company produces two products, a high end laptop computer under the label Bunsen Laptops, and an inexpensive desktop computer under the label Beaker Computers. The two products use two overhead activities, with the following costs:

Setting up equipment $ 2,000

Machining 12,000

The controller has collected the expected annual prime costs for each product, the machine hours, the setup hours, and the expected production.

Bunsen Beaker

Direct Labor $20,000 $5,000

Direct Materials 15,000 4,000

Units 2,000 2,000

Machine hours 750 1,500

Setup hours 50 50

Refer to Figure 7-4. Calculate the overhead cost per unit for Bunsen Laptops, using a plantwide rate based on direct labor costs.

$9.63 per laptop

$22.45 per laptop

$5.60 per laptop

$7.22 per laptop

$7.50 per laptop

2 points

Question 14

The formula for total carrying cost is

number of orders per year  cost of placing an order.

number of orders per year/cost of placing an order.

average number of units in inventory  cost of carrying one unit in inventory.

average number of units in inventory/cost of carrying one unit in inventory.

ordering cost + carrying cost.

2 points

Question 15

The formula for ordering cost is the

number of orders per year  cost of placing an order.

number of orders per year/cost of placing an order.

average number of units in inventory  cost of carrying one unit in inventory.

average number of units in inventory/cost of carrying one unit in inventory.

ordering cost + carrying cost.

2 points

Question 16

I. Activity Data

Activity Cost

Inspecting components (sampling only) $ 190,000

Reworking products (due to failed component) $2,254,000

Warranty work (due to failed component) $1,723,000

II. Supplier Data

Traynor Bello

Inc. Company

Unit Purchase Price $10.00 $8.95

Units Purchased 22,500 52,500

Sampling Hours 50 2,450

Rework hours 135 3,625

Warranty hours 475 6,000

Refer to Figure 7-3. Calculate the activity rate for inspecting components based on sampling hours.

$78 per hour

$72 per hour

$77.25 per hour

$80 per hour

$76 per hour

2 points

Question 17

Receiving provides 12,000 receiving hours and costs $60,000 per year. What is the activity rate for receiving?

$14 per receiving hour

$5 per receiving hour

$4 per receiving hour

$4.50 per receiving hour

cannot be determined from this information

2 points

Question 18

Figure 8-5.Sanders Company has the following information for last year:

Selling price $190 per unit

Variable production costs $52 per unit produced

Variable selling and admin. expenses $18 per unit sold

Fixed production costs $240,000

Fixed selling and admin. expenses $180,000

Units produced 12,000

Units sold 7,000

There were no beginning inventories. Refer to Figure 8-5. What is the cost of ending inventory for Sanders using the variable costing method?

$300,000

$280,000

$120,000

$260,000

2 points

Question 19

Figure 8-1.Last year, Fabre Company produced 20,000 units and sold 18,000 units at a price of $12. Costs for last year were as follows:

Direct materials $25,000

Direct labor 35,000

Variable factory overhead 12,000

Fixed factory overhead 37,000

Variable selling expense 9,000

Fixed selling expense 7,500

Fixed administrative expense 15,500

Fixed factory overhead is applied based on expected production. Last year, Fabre expected to produce 20,000 units. Refer to Figure 8-1. What is operating income for last year under absorption costing?

$41,000

$67,520

$85,900

$111,300

$45,000

2 points

Question 20

Costs incurred when products and services prior to being delivered do not conform to specifications or customer needs are

prevention costs.

appraisal costs.

a different category of quality-related costs.

external failure costs.

internal failure costs.

Grand View University OPERATION MGT 455 – Problem Set 6 essay help us: essay help us

Problem Set 6

9.13, 9.17, 10.29, E.3, E.5, and E.6

9.13 Sue Helms Appliances wants to establish an assembly line to manufacture its new product, the Micro Popcorn Popper. The goal is to produce five poppers per hour. The tasks,task times, and immediate predecessors for producing one Micro Popcorn Popper are as follows:

Task “Time

(min)” “Immediate

Predecessors”

A 10 –

B 12 A

C 8 A,B

D 6 B,C

E 6 C

F 6 D,E

a) What is the theoretical minimum for the smallest number of workstations that Helms can achieve in this assembly line? b) Graph the assembly line and assign workers to workstations. Can you assign them with the theoretical minimum?

c) What is the efficiency of your assignment?

9.17 The Mach 10 is a one-person sailboat manufactured by Creative Leisure. The final assembly plant is in Cupertino, California. The assembly area is available for production of the Mach 10 for 200 minutes per day. (The rest of the time it is busy making other products.) The daily demand is 60 boats. Given the information in the table on the next page,

Task Time (min) Predecessors

A 3 –

B 6 –

C 7 A

D 5 A,B

E 2 B

F 4 C

G 5 F

H 7 D,E

I 1 H

J 6 E

K 4 G,I,J

a) Draw the precedence diagram.

b) If the daily (24-hour) production rate is 96 units, what is the highest allowable cycle time?

c) If the cycle time after allowances is given as 10 minutes, what is the daily (24-hour) production rate?

d) With a 10-minute cycle time, what is the theoretical minimum number of stations with which the line can be balanced?

e) With a 10-minute cycle time and six workstations, what is the efficiency?

f) What is the total idle time per cycle with a 10-minute cycle time and six workstations?

g) What is the best work station assignment you can make without exceeding a 10-minute cycle time and what is its efficiency?

10.29 The Dubuque Cement Company packs 80-pound bags of concrete mix. Time-study data for the filling activity are shown in the following table. Because of the high physical demands of the job, the company’s policy is a 23% allowance for workers.

Element Observations (Seconds) “Performance

Rating (%)”

1 2 3 4 5

Grasp and place bag 8 9 8 11 7 110

Fill bag 36 41 39 35 122a 85

Seal bag 15 17 13 20 18 105

Place bag on conveyor 8 6 9 30b 35b 90

a) Compute the standard time for the bag-packing task.

b) How many observations are necessary for 99% confidence, within ± 5% accuracy?

E3 If Professor Laurie Macdonald takes 15 minutes to grade the first exam and follows an 80% learning curve, how long will it take her: a) to grade the 25th exam?

b) to grade the first 10 exams?

E5 Beth Zion Hospital has received initial certification from the state of California to become a center for liver transplants. The hospital, however, must complete its first 18 transplants under great scrutiny and at no cost to the patients. The very first transplant, just completed, required 30 hours. On the basis of research at the hospital, Beth Zion estimates that it will have an 80% learning curve. Estimate the time it will take to complete:

a) the 5th liver transplant.

b) all of the first 5 transplants.

c) the 18th transplant.

d) all 18 transplants

E6 Refer to Problem E.5. Beth Zion Hospital has just been informed that only the first 10 transplants must be performed at the hospital’s expense. The cost per hour of surgery is estimated to be $5,000. Again, the learning rate is 80% and the first surgery took 30 hours. a) How long will the 10th surgery take?

b) How much will the 10th surgery cost?

c) How much will all 10 cost the hospital?

BUSI 520 – Quiz 2 essay help service

Question 1

________ is the process by which we select, organize, and interpret information inputs to create a meaningful picture of the world.

Question 2

Brands that meet consumers’ initial buying criteria are called the ________.

Question 3

Gordon Jones is considering purchasing a computer from Best Buy. He has created a scale for rating eight different computers on three different characteristics. He plans to short-list only those computers, that score at least a seven on his scale on all three characteristics. Which of the following choice heuristics has he chosen?

Question 4

The relatively homogeneous and enduring divisions in a society, which are hierarchically ordered and whose members share similar values, interests, and behavior constitute ________.

Question 5

Consumers who worry about the environment and want products to be produced in a sustainable way have been named ________.

Question 6

Ben always reaches for the bright blue and yellow box of Ritz crackers when he visits the snack food aisle in the grocery store. He rarely even reads the box or checks the price. Which of the following heuristics is most likely being used by Ben?

Question 7

Steve has only 20 minutes to have lunch. Although he really likes McDonald’s, the line is very long and he is concerned that he will not have a chance to get through

the line and eat his lunch before he is due back at work. Steve perceives ________ in going to McDonald’s today.

Question 8

Which of the following theories developed by Frederick Herzberg distinguishes dissatisfiers from satisfiers?

Question 9

A mobile phone manufacturing company observes that the main reason for an abrupt fall in their sales volume is the unconventional design of their phones that consumers found inconvenient and unattractive. The findings prompt the company to adopt a new strategy. They redesigned the product models keeping the requirements of the end-user in mind. According to the expectancy value-model, the company’s strategy can be termed as ________.

Question 10

Maria considers buying a car for herself, after she notices the advantages derived by her best friend from his new car. Which of the following forms of stimulus has

activated Maria’s problem recognition process?

Question 11

Which of the following is true for business marketers?

Question 12

The approach to cost reduction that studies whether components can be redesigned or standardized or made by cheaper methods of production without adversely impacting product performance is termed as ________.

Question 13

With respect to e-procurement, Coca-Cola, Sara Lee, Kraft, PepsiCo, P&G, and several other companies joined forces to form a ________ called Transora to use

their combined leverage to obtain lower prices for raw materials.

Question 14

The partners in ________ systems are united in operational ways, but neither demonstrates structural commitment through legal means or adaptation.

Question 15

Jason Riggs’ company is considered to be an in-supplier for a lawn mower manufacturer. However, recently the lawn mower company has put out a memo to in- and out-suppliers indicating that it would like to change product specifications and delivery schedules. Which of the following buying situations is most likely to be in operation given this data?

Question 16

In the ________ category of buyer-supplier relationship, although bonded by a close, cooperative relationship, the seller adapts to meet the customer’s needs without expecting much adaptation or change on the part of the customer in exchange.

Question 17

In which of the following is a person performing the role of a gatekeeper?

Question 18

The total demand for many business goods and services is not much affected by price changes. Thus, this demand is ________.

Question 19

Patrick J. Robinson and his associates have identified eight stages in the business buying-decision process. This model is called the ________ framework.

Question 20

According to Patrick J. Robinson, the eight stages in the business buying-decision process are known as ________.

Question 21

If an organization’s marketing department wished to create “segment storyboards” to test the attractiveness of each segment’s positioning strategy, this action would

most likely occur in the ________ step of the segmentation process.

Question 22

A marketer is interested in segmenting a business market based on urgency of delivery and the size of the order. Which of the following major segmentation variables would the marketer most likely use to assist with the task?

Question 23

________ combines operationally driven mass customization with customized marketing in a way that empowers consumers to design the product service offering of their choice.

Question 24

All of the following are benefits of following the ________ approach to target market selection: a strong knowledge of the segment’s needs, a strong market presence, operating economies through specializing in production, distribution, and promotion.

Question 25

According to PRIZM, the ________ cluster is characterized as being in their late forties and fifties, college-educated, upper-middle-class homeowners that married

late, and are still raising children in comfortable suburban subdivisions and pursuing kid-centered lifestyles.

Question 26

A marketer is interested in segmenting a business market on ________ if the marketer intends to eventually segment the market based on loyalty and attitudes toward risk.

Question 27

In the ________ step of the market segmentation process, the marketer evaluates the segment using criteria such as market growth and market access.

Question 29

Rock band Foo Fighters created a digital street team that sends targeted e-mail messages to members who receive exclusive news, previews, and opportunities to win prizes. The Foo Fighters are using ________ to reach Generation Y.

Question 30

Hilton Hotels customizes rooms and lobbies according to location. Northeastern hotels are sleeker and more cosmopolitan. Southwestern hotels are more rustic.

This is an example of ________ segmentation.

Question 31

If a consumer, trying to decide between alternatives, believes that a particular brand delivers acceptable product performance and can be short listed, she is in

the ________ level of the brand dynamics pyramid.

Question 32

A parent brand that is associated with multiple products through brand extensions is also called a(n)________.

Question 33

With respect to the brand building pyramid, at which of the following “building block levels” would we expect the consumer to develop an intense, active loyalty?

Question 34

Brand ________ is the added value endowed to products and services.

Question 35

________ are devices that can be trademarked and serve to identify and differentiate the brand.

Question 36

According to the BRANDZ model of brand strength, brand building involves people progressing through a sequential series of steps. Which of these steps convey the

message ” Nothing else beats this brand”?

Question 37

Identify the four pillars of brand equity, according to brand asset valuator model.

Question 38

From a marketing management perspective, there are three main sets of brand equity drivers. Which of these drivers was most applicable when McDonald’s decided to use the “golden arches” and Ronald McDonald as symbols of their brand?

Question 40

________ brands are positioned with respect to competitors’ brands so that more important (and more profitable) flagship brands can retain their desired positioning.

Question 41

________ are attributes or benefits that consumers view as essential to a legitimate and credible offering within a certain product or service class.

Question 43

Which of the following criteria relates to consumers seeing the brand association as personally relevant to them?

Question 44

Which element of a brand story framework do Randall Ringer and Michael Thibodeau relate to the time, place, and context of the brand story?

Question 46

The ________ attack attempts to capture a significant share of the consumer market by launching a grand offensive on several fronts.

Question 48

The key idea in successful nichemanship is specialization. Which of the following specialists would most closely be identified with the characterization of being an

organization that limits its selling to one customer?

Question 49

A marketing manager has decided to “leapfrog” competition by moving into cutting-edge technologies. This indirect approach to attacking competition can be characterized as ________.

Question 50

For a market challenger, attacking ________ is a high risk but potentially high payoff strategy, which also allows it to distance itself from other challengers.

A Solution Contains 5 Grams Of Glucose Per 100 Milliliters. Each Mole Of Glucose free essay help: free essay help

1- A solution contains 5 grams of glucose per 100 milliliters. Each mole of glucose

weighs 180 grams. How many moles are there in 200 milliliters of the glucose solution?

2- A light-year is a measure of length equal to the distance that light travels in 1 year. Compute the conversion factor between light-years and meters, and find the distance to the star Proxima Centauri m in light-years. The speed of light is m/s. Show your conversion work with the appropriate ratios.

3- A jogger is going at 12ft/min. How fast is she going in miles per hour?

Chlorination of alkanes can produce a multitude of products. need essay help

Chlorination of alkanes can produce a multitude of products. Determine the number of monochlorinated and dichlorinated products that can be obtained by chlorination of 3-methylpentane. (Consider constitutional isomers only. Do not count stereoisomers.)

Posted

RES-866, Week 2.Assignment: Module 2 Problem Set buy essay help

Details:

Understanding the data sampling procedure and the description of the data is critical to accurately interpreting the results of a study. In this assignment, you will practice describing data from an SPSS data set.

General Requirements:

Use the following information to ensure successful completion of the assignment:

Access the document, “Introduction to Statistical Analysis Using IBM SPSS Statistics, Student Guide” to complete the assignment.

Download the file “Drinks.sav” and open it with SPSS. Use the data to complete the assignment.

Download the file “Census.sav” and open it with SPSS. Use the data to complete the assignment.

Directions:

Perform the following tasks to complete this assignment:

Locate the data set “Drinks.sav” and open it with SPSS. Follow the steps in section 2.11 Learning Activity as written. Answer questions 1-3 in the activity based on your observations of the SPSS output. Type your answers into a Word document. Copy and paste the full SPSS output including any supporting graphs and tables directly from SPSS into the Word document for submission to the instructor. The SPSS output must be submitted with the problem set answers in order to receive full credit for the assignment.

Locate the data set “Census.sav” and open it with SPSS. Follow the steps in section 3.9 Learning Activity as written. Answer all of the questions in the activity based on your observations of the SPSS output.Type your answers into a Word document. Copy and paste the full SPSS output including any supporting graphs and tables directly from SPSS into the Word document for submission to the instructor. The SPSS output must be submitted with the problem set answers in order to receive full credit for the assignment.

Locate the data set “Drinks.sav” and open it with SPSS. Follow the steps in section 4.18 Learning Activity as written. Answer questions 1-6 in the activity based on your observations of the SPSS output.Type your answers into a Word document. Copy and paste the full SPSS output including any supporting graphs and tables directly from SPSS into the Word document for submission to the instructor. The SPSS output must be submitted with the problem set answers in order to receive full credit for the assignment.

Kelly Pitney began her consulting business, Kelly Consulting, on April 1, 2016. essay help 123: essay help 123

Kelly Pitney began her consulting business, Kelly Consulting, on April 1, 2016. The accounting cycle for Kelly Consulting for April, including financial statements, was illustrated in this chapter. During May, Kelly Consulting entered into the following transactions:

5-2A Prepare A CVP Income Statement, Compute Break-Even Point, Contribution Margin Ratio, Margin Of Safety Ratio And Sales For Target Net Income writing essay help

P5-2A Prepare a CVP income statement, compute break-even point, contribution margin ratio, margin of safety ratio

and sales for target net income

Jorge Company bottles and distributes B-Lite, a diet soft drink. The beverage is sold for 50 cents per 16-ounce bottle

to retailers, who charge customers 75 cents per bottle. For the year 2017, management estimates the following revenues

and costs.

Sales

$1,800,000

Selling expenses – variable

$70,000

Direct materials

430,000 Selling expenses – fixed

65,000

Direct labor

360,000 Administrative expenses – variable

20,000

Manufacturing overhead- variable

380,000 Administrative expenses – fixed

60,000

Manufacturing overhead -fixed

280,000

Instructions

(a) Prepare a CVP income statement for 2017 based on management estimates. (show column for total amounts only.)

(b) Compute the break-even point in (1) units and (2) dollars.

(c ) Compute the contribution margin ratio and the margin of safety ratio. (Round to the nearest full percent.)

(d) Determine the sales dollars required to earn net income of $180,000.

NOTE: Enter a number in cells requesting a value; enter either a number or a formula in cells with a "?" .

(a)

Prepare a CVP income statement for 2017 based on management estimates. (show column for total amounts only.)

JORGE COMPANY

CVP Income Statement (Estimated)

For the Year Ending December 31, 2017

Sales

Variable expenses

Cost of goods sold

Selling expenses

Administrative expenses

Total variable expenses

Contribution margin

Fixed expenses

Cost of goods sold

Selling expenses

Administrative expenses

Total fixed expenses

Net income

(b)

$1,800,000

$1,170,000

135,000

80,000

1,385,000

415,000

280,000

Value

60,000

Compute the break-even point in (1) units and (2) dollars.

(b)(1)

Value

Fixed costs

Unit contribution margin

Break-even point in units

(b)(2)

Break-even point in units

Unit selling price

Unit variable costs

Unit contribution margin

Value

Break-even point in dollars

Break-even point in units

Unit selling price

Break-even point in dollars

Value

(c ) Compute the contribution margin ratio and the margin of safety ratio. (Round to the nearest full percent.)

Contribution margin ratio

Unit contribution margin

Unit selling price

Contribution margin ratio

Margin of safety ratio

Total sales

Break-even sales

Margin of safety (dollars)

Total sales

Margin of safety ratio

(d)

Value

Determine the sales dollars required to earn net income of $180,000.

Sales dollars required to earn target income

Fixed costs

Value

Target income

Value

Total fixed cost + target income

Contribution margin ratio

Sales dollars required

After you have completed P5-2A, consider the following additional question

Assume that the unit selling price per bottle changed to $0.60 each, and fixed manufacturing costs

increased to $300,000. Show impact of these changes on calculations.

CD5 – EXCEL Tutorial

CURRENT DESIGNS

Bill Johnson, sales manager, and Diane Buswell, controller at Current Designs are beginning to analyze the cost

considerations for one of the composite models of the kayak division. They have provided the following production

and operational costs necessary to produce one composite kayak.

Kevlar®

Resin and supplies

Finishing kit (seat, rudder, ropes, etc.)

Labor

Selling and administrative expenses – variable

Selling and administrative expenses – fixed

Manufacturing overhead – fixed

$250 per kayak

$100 per kayak

$170 per kayak

$420 per kayak

$400 per kayak

$119,000 per year

$240,000 per year

Bill and Diane have asked you to provide a cost-volume-profit analysis, to help them finalize the budget projections for

the upcoming year. Bill has informed you that the selling price of the composite kayak will be $2,000.

Instructions

(a) Calculate variable cost per unit.

(b) Determine the unit contribution margin.

(c ) Using the unit contribution margin, determine the break-even point in units for this product line.

(d) Assume that Current Designs plans to earn $270,000 on this product line. Using the unit contribution

margin, calculate the number of units that need to be sold to achieve this goal.

(e ) Based on the most recent sales forecast, Current Design plans to sell 1,000 units of this model.

Using your results from part (c ), calculate the margin of safety and the margin of safety ratio.

NOTE: Enter a number in cells requesting a value; enter either a number or a formula in cells with a "?" .

(a) Calculate variable cost per unit.

Kevlar®

Resin and supplies

Finishing kit (seat, rudder, ropes, etc.)

Labor

Selling and administrative expenses – variable

Total variable costs per unit

Value

(b) Determine the unit contribution margin.

Unit selling price

Unit variable cost

Unit contribution margin

Value

(c ) Using the unit contribution margin, determine the break-even point in units for this product line.

Selling and administrative expenses – fixed

Manufacturing overhead – fixed

Total fixed costs (a)

Unit contribution margin (b)

Break-even points (units) (a ÷ b)

Value

(d) Assume that Current Designs plans to earn $270,000 on this product line. Using the unit contribution

margin, calculate the number of units that need to be sold to achieve this goal.

Total fixed costs

Target net income

Total fixed costs + target net income (a)

Unit contribution margin (b)

Units need to be sold (a ÷ b)

Value

(e ) Based on the most recent sales forecast, Current Design plans to sell 1,000 units of this model.

Using your results from part (c ), calculate the margin of safety and the margin of safety ratio.

Margin of safety

Actual (expected) sales

Break-even sales

Margin of safety (dollars)

Value

Margin of safety ratio

Margin of safety (dollars) (a)

Actual (expected) sales (b)

Margin of safety ratio (a ÷ b)

Value

After you have completed CD-5, consider the following additional question

1. Assume that the unit selling price per kayak changed to $2,200 each, and fixed manufacturing overhead

increased to $360,000. Show impact of these changes on calculations.

E6-3 Compute net income under different alternatives

Barnes Company reports the following operating results for the month of August: sales $325,000

(units 5,000); variable costs $210,000; and fixed costs $75,000. Management is considering the following

independent courses of action to increase net income.

Increase selling price by 10% with no change in total variable costs or sales volume.

Reduce variable costs to 58% of sales.

Reduce fixed costs by $15,000.

Instructions

Compute the net income to be earned under each alternative. Which course of action will produce the

highest net income?

NOTE: Enter a number in cells requesting a value; enter either a number or a formula in cells with a "?" .

Increase selling price by 10% with no change in total variable costs or sales volume.

Current selling price

New selling price

(Round to nearest cent)

Total sales

Less: variable costs

Contribution margin

Less: fixed costs

Net income

Value

Reduce variable costs to 58% of sales.

Total Sales

Less: variable costs

Contribution margin

Less: fixed costs

Net income

Value

Reduce fixed costs by $15,000.

Total Sales

Less: variable costs

Contribution margin

Less: fixed costs

Net income

Value

After you have completed E6-3, consider the following additional questions.

Assume that unit selling price increased 5% with no change in total variable costs or sales volume.

Assume variable costs decreased to 53% of sales.

Assume that fixed costs increased by $20,000.

Which course of action will produce the highest net income?

CD6 EXCEL Tutorial

CURRENT DESIGNS

Current Designs manufactures two different types of kayak, rotomolded kayaks and composite kayaks.

The following information is available for each product line.

Sales price/unit

Variable costs/unit

Rotomolded

$950

$570

Composite

$2,000

$1,340

The company’s fixed costs are $820,000. An analysis of the sales mix identifies that rotomolded kayaks

make up 80% of the total units sold.

Instructions

(a) Determine the weighted-average unit contribution margin for Current Designs.

(b) Determine the break-even points in units for Current Designs and identify how many units of each

type of kayak will be sold at the break-even point. (Round to the nearest whole number.)

(c ) Assume that the sales mix changes, and rotomolded kayaks now make up 70% of total units sold.

Calculate the total number of units that would need to be sold to earn a net income of $2,000,000

and identify how many units of each type of kayak will be sold at this level of income. (Round to the

nearest whole number.)

(d) Assume that Current Designs will have sales of $3,000,000 with two-thirds of the sales dollars in

rotomolded kayaks and one-third of the sales dollars in composite kayaks. Assuming $660,000 of fixed

costs are allocated to the rotomolded kayaks and $160,000 to the composite kayaks, prepare a CVP

income statement for each product line.

(e ) Using the information in part (d), calculate the degree of operating leverage for each product line and

interpret your findings. (Round to two decimal places.)

(a) Determine the weighted-average unit contribution margin for Current Designs.

Sales price/unit

Variable costs/unit

Unit Contribution margin (UCM)

Product mix

Weighted Average UCM

Rotomolded

Kayaks

Value

Composite

Kayaks

Value

(b) Determine the break-even points in units for Current Designs and identify how many units of each

type of kayak will be sold at the break-even point. (Round to the nearest whole number.)

Fixed costs

Weighted Average UCM

Breakeven units

Breakeven unit distribution

Value

Rotomolded

Kayaks

Composite

Kayaks

(c ) Assume that the sales mix changes, and rotomolded kayaks now make up 70% of total units sold.

Calculate the total number of units that would need to be sold to earn a net income of $2,000,000

and identify how many units of each type of kayak will be sold at this level of income. (Round to the

nearest whole number.)

Target net income in units:

Sales price/unit

Variable costs/unit

Unit Contribution margin (UCM)

Product mix

Weighted Average UCM

Rotomolded

Kayaks

Value

Required sales in units:

Total fixed costs

Target net income

Total required sales (dollars)

Weighted Average UCM

Required sales in units

Value

Composite

Kayaks

Value

(d) Assume that Current Designs will have sales of $3,000,000 with two-thirds of the sales dollars in

rotomolded kayaks and one-third of the sales dollars in composite kayaks. Assuming $660,000 of fixed

costs are allocated to the rotomolded kayaks and $160,000 to the composite kayaks, prepare a CVP

income statement for each product line.

Sales

Variable Costs

Contribution Margin

Fixed Costs

Net Income

Rotomolded

Kayaks

Value

Composite

Kayaks

Value

(e ) Using the information in part (d), calculate the degree of operating leverage for each product line and

interpret your findings. (Round to two decimal places.)

Rotomolded

Kayaks

Contribution Margin (a)

Value

Net Income (b)

Degree of Operating Leverage (a ÷ b

Composite

Kayaks

Value

Interpretation of findings:

After you have completed CD6, consider the following additional question.

1. Assume that variable cost per unit for the rotomolded kayak and composite kayak changed to $610 and

$1,400 respectively. Show impact of these changes on each of the scenarios provided.

P7-3A Determine if product should be sold or processed further.

Thompson Industrial Products Inc. (TIPI) is a diversified industrial-cleaner processing company. The company’s Dargar plant

produces two products: a table cleaner and a floor cleaner from a common set of chemical inputs (CDG). Each week 900,000

ounces of chemical input are processed at a cost of $210,000 into 600,000 ounces of floor cleaner and 300,000 ounces of table

cleaner. The floor cleaner has no market value until it is converted into a polish with the trade name FloorShine. The additional

processing costs for this conversion amount to $240,000.

FloorShine sells at $20 per 30-ounce bottle. The table cleaner can be sold for $17 per 25-ounce bottle. However, the table

cleaner can be converted into two other products by adding 300,000 ounces of another compound (TCP) to the 300,000 ounces

of table cleaner. This joint process will yield 300,000 ounces each of table stain remover (TSR) and table polish (TP). The

additional processing costs for this process amounts to $100,000. Both table products can be sold for $14 per $25-ounce bottle.

The company decided not to process the table cleaner into TSR and TP based on the following analysis.

Production in ounces

Revenue

Costs:

CDG costs

TCP costs

Total costs

Weekly gross profit

Table

Cleaner

300,000

$204,000

70000*

70,000

$134,000

Process Further

Table Stain

Table

Remover (TSR)

Polish (TP)

300,000

$168,000

52,500

50,000

102,500

$65,500

52,500

50,000

102,500

$65,500

Total

$336,000

105,000 **

100,000

205,000

$131,000

*If table cleaner is not processed further, it is allocated 1/3 of the $210,000 of CDG cost, which is equal to 1/3 of the

total physical output.

** If table cleaner is processed further, total physical output is 1,200,000 ounces. TSR and TP combined account for

50% of the total physical output and are each allocated 25% of the CDG cost.

Instructions

(a)

Determine if management made the correct decision to not process the table cleaner further by doing the following.

(1) Calculate the company’s total weekly gross profit assuming the table cleaner is not processed further.

(2) Calculate the company’s total weekly gross profit assuming the table cleaner is processed further.

(3) Compare the resulting net incomes and comment on management’s decision.

(b)

Compare the resulting net incomes and comment on management’s decision.

NOTE: Enter a number in cells requesting a value; enter either a number or a formula in cells with a "?" .

(a)

Determine if management made the correct decision to not process the table cleaner further by doing the following.

(1) Calculate the company’s total weekly gross profit assuming the table cleaner is not processed further.

Table Cleaner Not Processed Further

Sales:

FloorShine

Table cleaner

Total Revenue

Costs:

CDG

Additional costs of FloorShine

Total costs

Gross profit

(a)

Value

Determine if management made the correct decision to not process the table cleaner further by doing the following.

(2) Calculate the company’s total weekly gross profit assuming the table cleaner is processed further.

Table Cleaner Processed Further

Sales:

FloorShine

Table Stain Remover

Table Polish

Total Revenue

Costs:

CDG

Additional costs of FloorShine

TCP

Total costs

Gross profit

(a)

Value

Determine if management made the correct decision to not process the table cleaner further by doing the following.

(3) Compare the resulting net incomes and comment on management’s decision.

Response:

(b)

Compare the resulting net incomes and comment on management’s decision.

Incremental revenue

Incremental costs

Total

Don’t Process

Table Cleaner

Further

Value

Process

Table Cleaner

Further

Value

Net Income

Increase

(Decrease)

Value

Response:

After you have completed P7-3A, consider the following additional question.

Assume that the selling price of the two table products after further processing changed to $13

for each 25-ounce bottle and the cost of TCP compound to further process changed to $120,000.

How do these changes impact the decision to process or not process further?

CD7 EXCEL Tutorial

CURRENT DESIGNS

Current Designs faces a number of important decisions that require incremental analysis. Consider each

of the following situations independently.

Situation 1

Recently, Mike Cichanowski, owner and CEO of Current Designs, received a phone call from the president

of a brewing company. He was calling to inquire about the possibility of Current Designs producing "floating

coolers" for a promotion his company was planning. These coolers resemble a kayak but are about one-third

the size. They are used to float food and beverages while paddling down the river on a weekend leisure trip.

The company would be interest in purchasing 100 coolers for the upcoming summer. It is willing to pay $250

per cooler. The brewing company would pick up the coolers upon completion of the order.

Mike met with Diane Buswell, controller, to identify how much it would cost Current Designs to produce

the coolers. After careful analysis, the following costs were identified.

Direct materials

Direct labor

$80/unit

$60/unit

Variable overhead

Fixed overhead

$20/unit

$1,000

Current Designs would be able to modify an existing mold to produce the coolers. The cost of these

modifications would be approximately $2,000.

Instructions

(a) Prepare an incremental analysis to determine whether Current Designs should accept this special order to

produce the coolers.

(b) Discuss additonal factors that Mike and Diane should consider if Current Designs is currently operating at

full capacity.

Situation 2

Current Designs is always working to identify ways to increase efficiency while becoming more environmentally

conscious. During a recent brainstorming session, one employee suggested to Diane Buswell, controller, that the

company should consider replacing the current rotomold oven as a way to realize savings from reduced energy

consumption. The oven operates on natural gas, using 17,000 therms of natural gas for an entire year. A new,

energy-efficient rotomold oven would operate on 15,000 therms of natural gas for an entire year. After seeking out

price quotes from a few suppliers, Diane determined that it would cost approximately $250,000 to purchase a new,

energy-efficient rotomold oven. She determines that the expected useful life of the new oven would be 10 years, and

it would have no salvage value at the end of its useful life. Current Designs would be able to sell the current oven for

$10,000

Instructions

(a) Prepare an incremental analysis to determine if Current Designs should purchase the new rotomold oven,

assuming that the average price for natural gas over the next 10 years will be $0.65 per therm.

(b) Diane is concerned that natural gas prices might increase at a faster rate over the next 10 years. If the company

projects that the average natural gas price of the next 10 years could be as high as $0.85 per therm, discuss

how that might change your conclusion in (a).

Situation 3

One of Current Designs’ competitive advantages is found in the ingenuity of its owners and CEO, Mike Cichanowski. His

involvement in the design of kayak molds and production techniques has led to Current Designs being recognized as an

industry leader in the design and production of kayaks. This ingenuity was evident in an improved design of one of the

most important component of a kayak, the seat. The "Revolution Seating System" is one-of-a-kind, rotating axis seat

that gives unmatched, full contact, under-leg support. It is quickly adjustable with a lever-lock system that allows for a

customizable seat position that maximizes comfort for the rider.

Having just designed the "Revolution Seating System", Current Designs must now decide whether to produce the seats

internally or buy them from an outside supplier. The costs for Current Designs to produce the seats are as follows.

Direct materials

Variable overhead

$20/unit

$12/unit

Direct labor

Fixed overhead

$15/unit

$20,000

Current Designs will need to produce 3,000 seats this year; 25% of the fixed overhead will be avoided if the seats are

purchased from an outside vendor. After soliciting prices from outside suppliers, the company determined that it will

cost $50 to purchase a seat from an outside vendor.

Instructions

(a) Prepare an incremental analysis showing whether Current Designs should make or buy the "Revolution Seating

System."

(b) Would your answer in (a) change if the productive capacity released by not making the seats could be used to

produce income of $20,000?

NOTE: Enter a number in cells requesting a value; enter either a number or a formula in cells with a "?" .

Situation 1

(a) Prepare an incremental analysis to determine whether Current Designs should accept this special order to

produce the coolers.

Net Income

Reject Order

Accept Order

Increase (Decrease)

Revenues

Value

Costs

Net income

Value

Response:

(b)

Discuss additonal factors that Mike and Diane should consider if Current Designs is currently operating at

full capacity.

Response:

Situation 2

(a)

Prepare an incremental analysis to determine if Current Designs should purchase the new rotomold oven,

assuming that the average price for natural gas over the next 10 years will be $0.65 per therm.

Variable mfg. costs

New oven costs

Proceed from

scrapping old oven

Total

Retain Oven

Value

Replace Oven

Value

Net Income

Increase

(Decrease)

Value

Response:

(b)

Diane is concerned that natural gas prices might increase at a faster rate over the next 10 years. If the company

projects that the average natural gas price of the next 10 years could be as high as $0.85 per therm, discuss

how that might change your conclusion in (a).

Variable mfg. costs

New oven costs

Proceed from

scrapping old oven

Total

Retain Oven

Replace Oven

Net Income

Increase

(Decrease)

Value

Response:

Situation 3

(a) Prepare an incremental analysis showing whether Current Designs should make or buy the "Revolution Seating

System."

Net Income

Make

Buy

Value

(Decrease)

Value

Direct labor

Value

Variable mfg. costs

Value

Fixed mfg. costs

Value

Purchase price

Value

Direct materials

Total annual cost

Response:

(b)

Would your answer in (a) change if the productive capacity released by not making the seats could be used to

produce income of $20,000?

Total annual cost

Make

Value

Buy

Value

Net Income

Increase

(Decrease)

Value

Opportunity cost

Value

Total cost

Response:

After you have completed CD7, consider the following additional questions.

Assume in situation 1, the unit selling price changed to $195, fixed overhead changed to $1,800 and

the cost of modifications changed to $3,000. Show the impact of these changes on decision to accept or

reject the special order.

Assume in situation 2, the purchase price of the new oven changed to $100,000. Would this change

the decision to retain or replace the oven?

Assume in situation 3, that the estimated number of seats to be produced changed to 3,500 and the cost to purchase

one seat from an outside supplier changed to $55. Should Current Designs make or buy the seats?

Conch Republic Electronics Is A Mid Sized Electronics Manufacturer Located In Key West, Florida cbest essay help: cbest essay help

Conch Republic Electronics is a mid sized electronics manufacturer located in Key West, Florida. The company president is Shelley Couts, who inherited the company. When it was founded over 70 years ago, the company originally repaired radios and other household appliances. Over the years, the company expanded into manufacturing and is now a reputable manufacturer of various electronic items. Jay McCanless, a recent MBA graduate, has been hired by the company’s finance department.

One of the major revenue-producing items manufactured by Conch Republic is a personal digital assistant (PDA). Conch Republic currently has one PDA model on the market, and sales have been excellent. The PDA is a unique item in that it comes in a variety of tropical colors and is preprogrammed to play Jimmy Buffett music. However, as with any electronic item, technology changes rapidly, and the current PDA has limited features in comparison with newer models. Conch Republic developed a prototype for a new PDA that has all the features of the existing PDA but adds new features such as cell phone capability. The company has performed a marketing study to determine the expected sales figures for the new PDA.

Conch Republic can manufacture the new PDA for $200 each in variable costs. Fixed costs for the operation are estimated to run $4.5 million per year. The estimated sales volume is 70,000, 80,000, 100,000, 85,000, and 75,000 per each year for the next five years, respectively. The unit price of the new PDA will be $340. The necessary equipment can be purchased for $16.5 million and will be depreciated on a 5 year straight-line schedule.

Net working capital investment for the PDAs will be $6,000,000 the first year of operations. Of course NWC will be recovered at the projects end. Conch Republic has a 35 percent corporate tax rate and a 12 percent required return.

Shelly has asked Jay to prepare a report that answers the following questions:

(A) What is the IRR of the project?

(B) What is the NPV of the project, based on the required rate of return of 12%?

BST 322 Week 2 Assignment professional essay help: professional essay help

BST 322 Week 2 Assignment

What is the probability of rolling a four in the gambling dice game of craps (given two six sided dice)? What is the probability that a player can roll a four 3 times in a row (assume that rolling the dice each time does not affect the outcome of the next roll)?

TIPS: Probability is a fraction or decimal = Number of ways it can happen/Total Number of Possibilities

STEP A: Total Number of possibilities = 36 as follows:

(1,1)

(1,2)

(1,3)

(1,4)

(1,5)

(1,6)

(2,1)

(2,2)

(2,3)

(2,4)

(2,5)

(2,6)

(3,1)

(3,2)

(3,3)

(3,4)

(3,5)

(3,6)

(4,1)

(4,2)

(4,3)

(4,4)

(4,5)

(4,6)

(5,1)

(5,2)

(5,3)

(5,4)

(5,5)

(5,6)

(6,1)

(6,2)

(6,3)

(6,4)

(6,5)

(6,6)

STEP B: Determine the number of ways it can happen for a 4 using two dice.

STEP C: Form the Fraction: Number of ways it can happen/Total Possibilities.

For the 2nd part of Q1 use the multiplicative/consecutive rule

Population A and Population B both have a mean height of 70.0 inches with an SD of 6.0. A random sample of 35 people is picked from population A, and random sample of 65 people is selected from Population B. Which sample mean will probably yield a more accurate estimate of its population mean? Why?

TIP: See page 90. You can also calculate the SEM and compare the two values.

3. Suppose we obtained data on vein size after application of a nitroglycerin ointment in a sample of 50 patients. The mean vein size is found to be 9.7mm with an SD of 2.5. Using a t distribution table, what are the confidence limits for a 95% confidence interval? For a 99% confidence interval?

TIP: Please use either StatCrunch – 1-SAMPLE T-TEST (Summary) on a blank sheet or the formula on page 94.

4. In a pilot study evaluating the use of a new drug to lower resting heart rates (HR) of patients, the following data was recorded:

Subject #

Resting HR

001

002

003

004

005

006

007

008

009

010

011

012

013

014

015

016

017

Given that the average resting HR of the general population for this study is 72, use StatCrunch to perform the appropriate t test. What is the value of t? Using an alpha of 0.05, is the t statistic significant? Why? What are the confidence limits for a 95% confidence interval here and what do they mean for this patient group? Copy and Paste your work from StatCrunch into your Word document submission.

TIP: USE STATCRUNCH – 1-SAMPLE. Remember to input 72 as per the screen below

5. Write one or two sentences that could be used to report the results obtained for the t-test in Exercise 4.

TIP: For the report, please use the specific t-test value, the p-value from the test, state whether the result is significant or not and whether you would reject/accept the null hypothesis

6. For which of the following situations is the independent groups t-test appropriate (if inappropriate, why?):

a. The independent variable is infant birth weight at one week (normal vs high); the dependent variable is resting heart rate.

b. The independent variable is radiation treatment on throat cancer patients (after a low dose and then a high dose treatment); the dependent variable is white blood cell count.

c. The IV is infant birth weight (low vs normal vs high); the DV is number of days absent from school in first grade.

d. The IV is gender (male vs female); the DV is compliance vs noncompliance with a medication regimen.

e. The independent variable is married status (single vs married); the dependent variable is happiness measured on a scale from 1 to 50

TIP:

Determine the characteristics of independent groups for t-tests? How many groups are there in the situation? Are there 2 groups in the situation? Are they independent groups and is the DV interval/ratio? If the answer is “yes” to the 3 questions, the situation is APPROPRIATE and you should state that it is so. If one or more of the conditions is/are not present, then the test is inappropriate.

7. For which of the following situations is the dependent groups t-test appropriate (if not appropriate, why?)

a. The IV is presence or absence of conversation directed to comatose patients (same patients with and without conversation); the DV is the patients’ intracranial pressure.

b. The IV is birth type (home vs hospital); the DV is perceived functional ability of the patient 48 hours after surgery.

c. The IV is time since incarceration (1 months vs 3 months vs 6 months); the DV is body weight.

d. The IV is menopausal state (pre vs post) in the same women over time; the DV is attitudes toward menopause.

e. The IV is nap therapy for narcoleptics (same patients before vs after treatment); the DV is the type of nap they had the following week (had unplanned vs didn’t have unplanned nap).

TIP: Determine the characteristics of dependent groups for t-tests. How many groups are there in the situation? Are there 2 groups in the situation? Are they dependent groups and is the DV interval/ratio? If the answer is “yes” to the 3 questions, the situation is APPROPRIATE and you should state that it is so. If one or more of the conditions is/are not present, then the test is inappropriate

8. Suppose we wanted to test the hypothesis that a control group of cancer patients (Group 1) would report higher mean pain ratings than an experimental group receiving special massage treatments (Group 2). Use the following information. Compute a t-statistic for independent groups:

mean group 1 = 79.1 SD21 = 42.1 n1 = 25

mean group 2 = 74.1 SD22 = 39.7 n2 = 25

What are the degrees of freedom and the value of t ? Using α=0.05 for a two-tailed test, is this t statistic significant? Show your calculations (or StatCrunch output) for full credit.

9. Write one or two sentences that could be used to report the results obtained for the t-test in Exercise 8.

TIP: For the report, please use the t-test value, the p-value from the test, state whether the result is significant or not and whether you would reject/accept the null hypothesis.

10. For each of the following t values, indicate whether the t is statistically significant for a two-tailed test, at the specified alphas:

a. t = 2.90, df = 25, α = 0.001

b. t = 2.00, df = 25, α = 0.05

c. t = 5.52, df = 10, α = 0.01

d. t = 2.02, df = 20, α = 0.05

TIP: Use the tables on page 412 to obtain your answer. If the t-value is GREATER than the value in the critical/tabled value, the result is statistically significant.

11. For each of the following situations, indicate whether ANOVA is appropriate; if not appropriate, the reason why not; and, if appropriate, the type of ANOVA that would be used (i.e., one-way, repeated measures, etc.)

a. The IVs are ethnicity (Asian, White, African American, Hispanic) and gender (male vs female); the DV is serum cholesterol levels.

b. The IV is smoking status – smokers vs non-smokers; the DV is health-related hardiness as measured on a 20-item scale.

c. The IV is maternal breast feeding status (breastfeeds daily vs breastfeeds at least 1-3 times/week vs doesn’t breastfeed); the DV is maternal bonding with infant, as measured on a 20-item self-report scale.

d. The IV is treatment group for patients with drug-induced shivering (extremity wraps vs high room temp vs normal room temp without wraps) different patients used for each treatment; the DV is myocardial oxygen consumption (measured in ml O2/min per 100g of tissue).

e. The IV is length of gestation (preterm vs term vs postterm) using the same multiple birth mothers over time; the DV is blood pressure 10 minutes post delivery.

TIP: Determine the characteristics of ANOVAs. How many groups are there in the situation? Are there 3 groups in the situation? Is the DV interval/ratio? If the answer is “yes” to all the questions, the situation is APPROPRIATE and you should state that it is so. If one or more of the conditions is/are not present, then the test is inappropriate. If it is APPROPRIATE, please state which type of ANOVA it is.

12. Suppose we wanted to compare the somatic complaints (as measured on a scale known as the Physical Symptom Scale or PSS) of three groups of people: non-smokers, smokers, and people who recently quit smoking. Using the following data for PSS, do a one-way ANOVA to test the hypothesis that the population means are equal:

Nonsmokers Smokers Quitters

19 31 30

28 29 22

29 22 30

20 20 29

25 28 34

Using StatCrunch, determine the means for the three groups and compute the sums of squares, degrees of freedom, and mean squares for these data. What is the value of F? Using an alpha of 0.05, is the F statistic significant? Why? Copy and Paste your work from StatCrunch into your Word document submission.

TIP: Conduct a one-way ANOVA using STATCRUNCH

13. A new motorcycle is being developed to meet new gas mileage standards recently passed by the federal government. An engineer tested three model designs by randomly assigning the motorcycles in a blind study (the riders recorded the mileage but did not know the design of the motorcycle, only its code). The data in miles per gallon (MPG) for the three designs is listed below:

X-1

B-1

Z-1

Using StatCrunch, determine the means for the three groups and compute the sums of squares, degrees of freedom, and mean squares for these data. What are the hypotheses to be tested here? What is the value of F? Using an alpha of 0.05, is the F statistic significant? Why? Copy and Paste your work from StatCrunch into your Word document submission for full credit.

TIP: Another example using 1-way ANOVA in StatCrunch

14. For each of the following F values, indicate whether the F is statistically significant at the specified alpha level:

a. F = 4.80, df = 4, 40 α = 0.01

b. F = 5.00, df = 3, 60, α = 0.001

c. F = 3.45, df = 3, 27, α = 0.05

d. F = 1.99, df = 2, 150, α = 0.01

e. F = 3.09, df = 2, 250, α = 0.05

TIP: Use the textbook ANOVA tables on pages 413 to 415 [look to see if the alpha value for each of your F-statistic is correct for the table you have selected].

If the F-statistic is GREATER than the value in the critical/tabled value, the result is statistically significant.

Strategic Principles Of Consensus Organizing buy argumentative essay help

The Strategic Principles of Consensus Organizing

Can you teach people how to be strategic? It’s a question that trainers and teachers often ask as they approach a new training program or a classroom full of eager faces. Thinking strategically and pragmatically is the hallmark of a good consensus organizer. Consensus organizing is based on several key strategic principles that are the fundamental beliefs and values that guide the implementation of the model and its activities. These principles also express the philosophy and the attitude behind the consensus organizing approach. As consensus organizers begin to enter a community, these principles are at the forefront of their minds as their organizing strategy takes shape. This chapter explains these principles and why they are important to consensus organizing.

Table 3.1 summarizes the five core strategic principles of consensus organizing (Consensus Organizing Institute, n.d.).

Table 3.1 Strategic Principles of Consensus Organizing

Strategic Principle Key Strategies Example

Solutions to local problems should come from affected communities.

Strategies and objectives are set by the community.

Incorporate community’s existing social networks.

Analyze and identify individual self-interests and mutual community interests and build relationships based on those interests.

Residents bring recent crime problems to the attention of the local police and ask for assistance in developing a crime watch program. The local police work with residents to develop a neighborhood watch. Relationships are built between residents and the police.

Pragmatic leadership is present in communities, though not always recognized.

Identify trusted, respected, behind-the-scenes leaders.

Position leaders to take responsibility for effort.

Build leaders’ skills and confidence to succeed.

An older woman to whom young mothers turn for parenting help.

A teacher who stays after school hours to help his students with their studies.

Self-interest can be harnessed as a motivation for improving the welfare of communities.

Analyze and identify the interests of members of external power structure (e.g., government, philanthropy, corporate, social service).

Position them to make genuine contributions aligned with their and the community’s interests.

A local foundation director who has $1 million to improve housing in local distressed neighborhoods, but who does not have relationships with community-based organizations located in those neighborhoods.

If a project achieves its short-term goals without positioning the participants to make even greater gains in the future, then an opportunity has been missed.

Position community leaders to take the lead on projects.

Use short-term projects to build community’s skills and relationships with power structure to lay the foundation for more comprehensive efforts.

A neighborhood cleanup that builds relationships among residents and between residents and the city can lead to new opportunities, such as improved code enforcement and the rehab of dilapidated housing in cleanup area.

Building relationships and strategically positioning leaders to make a program work requires time, care, and finesse.

Understand and gain trust of leaders of the community and power structure.

Break down stereotypes and misperceptions that community and power structure have of one another.

Invest the time up front to position leaders of the community and power structure to develop genuine strategic partnerships.

Going to churches, agencies, and community organization meetings, and meeting residents one-on-one in their homes. Attending local housing symposiums, city council meetings, and chamber of commerce meetings, as well as meeting one-on-one with members of the external power s

Three Beads Are Placed Along A Thin Rod. essay help free: essay help free

Three beads are placed along a thin rod. The first bead, of massm1 = 27 g, is placed a distance d1 = 0.55 cm from the left end of the rod. The second bead, of mass m2 =11 g, is placed a distance d2 = 1.9 cm to the right of the first bead. The third bead, of mass m3 = 45 g, is placed a distance d3 = 4.8 cm to the right of the second bead. Assume an x-axis that points to the right.

a)Write a symbolic equation for the location of the center of mass of the three beads relative to the left end of the rod, in terms of the variables given in the problem statement. xcm =

b)Find the center of mass, in centimeters, relative to the left end of the rod.

c)Write a symbolic equation for the location of the center of mass of the three beads relative to the center bead, in terms of the variables given in the problem statement.

d)Find the center of mass, in centimeters, relative to the middle bead.

ACC 303 Homework Chapter 3 essay help 123

Brief Exercise 3-5

Assume that on February 1, Procter & Gamble (P&G) paid $750,000 in advance for 1 years’ insurance coverage. Prepare P&G’s February 1 journal entry and the annual adjusting entry on June 30. (Credit account titles are automatically indented when amount is entered. Do not indent manually. If no entry is required, select “No entry” for the account titles and enter 0 for the amounts. Record journal entries in the order presented in the problem. Round answers to 0 decimal places, e.g. 5,275.)

Date

Account Titles and Explanation

Debit

Credit

Description: https://edugen.wiley.com/edugen/art2/common/pixel.gif

Description: https://edugen.wiley.com/edugen/art2/common/pixel.gif[removed]

Exercise 3-3

The trial balance of Blues Traveler Corporation does not balance.

BLUES TRAVELER CORPORATION

TRIAL BALANCE

APRIL 30, 2014

Debit

Credit

Cash

$6,194

Accounts Receivable

5,381

Supplies

3,108

Equipment

6,241

Accounts Payable

$7,185

Common Stock

8,141

Retained Earnings

2,141

Service Revenue

5,341

Office Expense

4,461

$25,385

$22,808

An examination of the ledger shows these errors.

Cash received from a customer on account was recorded (both debit and credit) as $1,521 instead of $1,971.

The purchase on account of a computer costing $2,422 was recorded as a debit to Office Expense and a credit to Accounts Payable.

Services were performed on account for a client, $2,391, for which Accounts Receivable was debited $2,391 and Service Revenue was credited $366.

A payment of $236 for telephone charges was entered as a debit to Office Expense and a debit to Cash.

The Service Revenue account was totaled at $5,341 instead of $5,421.

From this information, prepare a corrected trial balance.

Blues Traveler Corporation

Trial Balance (Corrected)

April 30, 2014

Debit

Credit

Description: https://edugen.wiley.com/edugen/art2/common/pixel.gif[removed]

Totals

Description: https://edugen.wiley.com/edugen/art2/common/pixel.gif[removed]

Description: https://edugen.wiley.com/edugen/art2/common/pixel.gif

Exercise 3-6

Karen Weller, D.D.S., opened a dental practice on January 1, 2014. During the first month of operations, the following transactions occurred.

Performed services for patients who had dental plan insurance. At January 31, $760 of such services was performed but not yet billed to the insurance companies.

Utility expenses incurred but not paid prior to January 31 totaled $510.

Purchased dental equipment on January 1 for $89,500, paying $23,900 in cash and signing a $65,600, 3-year note payable. (a) The equipment depreciates $490 per month. (b) Interest is $550 per month.

Purchased a one-year malpractice insurance policy on January 1 for $27,000.

Purchased $2,070 of dental supplies. On January 31, determined that $540 of supplies were on hand.

Prepare the adjusting entries on January 31. Account titles to be used are Accumulated Depreciation—Equipment, Depreciation Expense, Service Revenue, Accounts Receivable, Insurance Expense, Interest Expense, Interest Payable, Prepaid Insurance, Supplies, Supplies Expense, Utilities Expense, and Accounts Payable. (Credit account titles are automatically indented when amount is entered. Do not indent manually. If no entry is required, select “No entry” for the account titles and enter 0 for the amounts.)

No.

Account Titles and Explanation

Debit

Credit

Description: https://edugen.wiley.com/edugen/art2/common/pixel.gif[removed]

3 (a)

Description: https://edugen.wiley.com/edugen/art2/common/pixel.gif[removed]

3 (b)

Description: https://edugen.wiley.com/edugen/art2/common/pixel.gif[removed]

Description: https://edugen.wiley.com/edugen/art2/common/pixel.gif

Exercise 3-9 (Part Level Submission)

Selected accounts of Urdu Company are shown below.

Supplies

Beg. Bal.

760

10 ⁄ 31

530

Salaries and Wages Expense

10 ⁄15

860

10 ⁄31

610

Unearned Service Revenue

10 ⁄31

490

10 ⁄20

680

Service Revenue

10 ⁄17

4,260

10 ⁄31

2,830

10 ⁄31

490

Accounts Receivable

10 ⁄ 17

4,260

10 ⁄31

2,830

Salaries and Wages Payable

10 ⁄31

610

Supplies Expense

10 ⁄31

530

Description: https://edugen.wiley.com/edugen/art2/common/pixel.gif

Description: Collapse question part

(a)

From an analysis of the T-accounts, reconstruct the October transaction entries. (Credit account titles are automatically indented when amount is entered. Do not indent manually. If no entry is required, select “No entry” for the account titles and enter 0 for the amounts.)

Date

Account Titles and Explanation

Debit

Credit

10/15

Description: https://edugen.wiley.com/edugen/art2/common/pixel.gif[removed]

10/17

Description: https://edugen.wiley.com/edugen/art2/common/pixel.gif[removed]

10/20

Description: https://edugen.wiley.com/edugen/art2/common/pixel.gif[removed]

Description: https://edugen.wiley.com/edugen/art2/common/pixel.gif

(b)

From an analysis of the T-accounts, reconstruct the adjusting journal entries that were made on October 31, 2014. (Credit account titles are automatically indented when amount is entered. Do not indent manually. If no entry is required, select “No entry” for the account titles and enter 0 for the amounts.)

No.

Date

Account Titles and Explanation

Debit

Credit

10/31

Description: https://edugen.wiley.com/edugen/art2/common/pixel.gif[removed]

(To record the use of supplies during October)

10/31

Description: https://edugen.wiley.com/edugen/art2/common/pixel.gif[removed]

(To record revenue for services performed for which

payment has not yet been received)

10/31

Description: https://edugen.wiley.com/edugen/art2/common/pixel.gif[removed]

(To record liability for accrued payroll)

10/31

Description: https://edugen.wiley.com/edugen/art2/common/pixel.gif[removed]

(To reduce the Unearned Service Revenue account for service that has been performed)

Exercise 3-16

Presented below are selected account balances for Homer Winslow Co. as of December 31, 2014.

Inventory 12/31/14

$62,120

Cost of Goods Sold

$226,590

Common Stock

77,410

Selling Expenses

17,010

Retained Earnings

48,680

Administrative Expenses

38,070

Dividends

19,590

Income Tax Expense

33,450

Sales Returns and Allowances

12,550

Sales Discounts

15,950

Sales Revenue

412,380

Prepare closing entries for Homer Winslow Co. on December 31, 2014. (Credit account titles are automatically indented when amount is entered. Do not indent manually. If no entry is required, select “No entry” for the account titles and enter 0 for the amounts.)

No.

Account Titles and Explanation

Debit

Credit

Description: https://edugen.wiley.com/edugen/art2/common/pixel.gif[removed]

(To close accounts with credit balances)

Description: https://edugen.wiley.com/edugen/art2/common/pixel.gif[removed]

(To close accounts with debit balances)

Description: https://edugen.wiley.com/edugen/art2/common/pixel.gif[removed]

(To close net income / (loss))

Description: https://edugen.wiley.com/edugen/art2/common/pixel.gif[removed]

Description: https://edugen.wiley.com/edugen/art2/common/pixel.gif

IFRS Practice Question 1

Which statement is correct regarding IFRS?

Description: https://edugen.wiley.com/edugen/art2/common/pixel.gif

[removed]

IFRS reverses the rules of debits and credits, that is, debits are on the right and credits are on the left.

[removed]

IFRS uses the same process for recording transactions as GAAP.

[removed]

The chart of accounts under IFRS is different because revenues follow assets.

[removed]

None of the these statements are correct.

IFRS Practice Question 2

Information in a company’s first IFRS statements must:

Description: https://edugen.wiley.com/edugen/art2/common/pixel.gif

[removed]

have a cost that does not exceed the benefits.

[removed]

be transparent.

[removed]

provide a suitable starting point.

[removed]

all of these are correct.

IFRS Practice Question 3

The transition date is the date:

Description: https://edugen.wiley.com/edugen/art2/common/pixel.gif

[removed]

when a company no longer reports under its national standards.

[removed]

when the company issues its most recent financial statement under IFRS.

[removed]

three years prior to the reporting date.

[removed]

none of these choices.

IFRS Practice Question 4

When converting to IFRS, a company must:

Description: https://edugen.wiley.com/edugen/art2/common/pixel.gif

[removed]

recast previously issued financial statements in accordance with IFRS.

[removed]

use GAAP in the reporting period but subsequently use IFRS.

[removed]

prepare at least three years of comparative statements.

[removed]

use GAAP in the transition year but IFRS in the reporting year.

IFRS Practice Question 5

The purpose of presenting comparative information in the transition to IFRS is:

Description: https://edugen.wiley.com/edugen/art2/common/pixel.gif

[removed]

to ensure that the information is a faithful representation.

[removed]

in accordance with the Sarbanes-Oxley Act.

[removed]

to provide users of the financial statements with information on GAAP in one period and IFRS in the other period.

[removed]

to provide users of the financial statements with information on IFRS for at least two periods.

For each of the following pairs of gas properties, describe the relationship between the properties, describe a simple system that could be used to demonstrate the relationship, and explain the reason for the relationship: college essay help online

Chapter 13

45: For each of the following pairs of gas properties, describe the relationship between the properties, describe a simple system that could be used to demonstrate the relationship, and explain the reason for the relationship:

(a) volume and pressure when number of gas particles and temperature are constant, (b) pressure and temperature when volume and the number of gas particles are constant, (c) volume and temperature when pressure and the number of gas particles are constant, (d) the number of gas particles and pressure when volume and temperature are constant, and (e) the number of gas particles and volume when pressure and temperature are constant.

56: Ethylene oxide is produced from the reaction of ethylene and oxygen at

270-290 °C and 8-20 atm. In order to prevent potentially dangerous pressure buildups, the container in which this reaction takes place has a safety valve set to release gas when the pressure reaches 25 atm. If a 15-m3 reaction vessel contains 7.8 × 103 moles of gas, at what temperature will the pressure reach 25 atm? (There are 103 L per m3.)

84: The hydrogen gas used to make ammonia can be made from small hydrocarbons such as methane in the so-called steam-reforming process, run at high temperature and pressure.

If 3.2 atm of methane at 21 °C are introduced into a container, to what temperature must the gas be heated to increase the pressure to 12 atm?

If 4.0 × 103 L of methane gas at 21 °C is heated and allowed to expand at a constant pressure, what will the volume become in m3 when the temperature reaches 815 °C?

What volume of methane gas at 21 °C and 1.1 atm must be compressed to yield 1.5 × 104 L of methane gas at 12 atm and 815 °C?

The hydrogen gas to make ammonia, hydrogen chloride gas, and methanol can be obtained from small hydrocarbons such as methane or propane through the steam-reforming process, conducted at 41 atm and 760-980 ̊C. If 2.7 x 107L of C3H3 (g) at 810 ̊C and 8.0 atm react in the first step of the process, shown below, what is the maximum volume in liters of CO(g) at STP that can form?

C3H8 + 3H2O→ 3CO + 7H2

3CO + 3H2O→ 3CO2 + 3H2

103: The atmosphere of Venus contains carbon dioxide and nitrogen gases. At the planet’s surface, the temperature is about 730 K, the total atmospheric pressure is 98 atm, and the partial pressure of carbon dioxide is 94 atm. If scientists wanted to collect 10.0 moles of gas from the surface of Venus, what volume of gas should they collect?

Chapter 14

41: Acetone, CH3COCH3, is a laboratory solvent that is also commonly used as a

nail polish remover.

Describe the submicroscopic events taking place at the surface of liquid

acetone when it evaporates.

Do all of the acetone molecules moving away from the surface of the liquid

escape? If not, why not? What three criteria must be met for a molecule to

escape from the surface of the liquid and move into the gas phase?

If you spill some nail polish remover on your hand, the spot will soon feel

cold. Why?

If you spill some acetone on a lab bench, it evaporates much faster than the

same amount of acetone in a test tube. Why?

If you spill acetone on a hot plate in the laboratory, it evaporates much

more quickly than the same amount of acetone spilled on the cooler lab

bench. Why?

50: Butane is a gas at room temperature and pressure, but the butane found in some

cigarette lighters is a liquid. How can this be?

55: Classify each of the following bonds as nonpolar covalent, polar covalent, or

ionic. If a bond is polar covalent, identify the atom that has the partial negative

charge and the atom that has the partial positive charge. If a bond is ionic,

identify the ion that has the negative charge and the ion that has the positive

charge.

N−O d. H−I g. Se−I j. F−P

Al−Cl e. Br−Cl h. N−Sr

Cl−N f. Cl−S i. O−F

Chapter 15

37: Would the following combinations be expected to be soluble or insoluble?

polar solute and nonpolar solvent

nonpolar solute and nonpolar solvent

ionic solute and hexane

molecular solute with small molecules and water

hydrocarbon solute and hexane

41: Predict whether each of the following is soluble in water or not.

potassium hydrogen sulfate, KHSO4 (used in wine making)

the polar molecular compound propylene glycol, CH3CH(OH)CH2OH (used in some antifreezes)

benzene, C6H6 (use to produce many organic compounds)

56: You throw a backyard party that resembles your idea of a big Texas barbecue. The guests get more food than they could possibly eat, including a big juicy steak in the center of each plate. Describe how soap or detergent can help you clean the greasy plates you’re left with when your guests go home, referring to the interactions between particles and the corresponding changes that take place on the submicroscopic level.

62: Some of the minerals found in rocks dissolve in water as it flows over the rocks. Would these minerals dissolve more quickly

at the bottom of a waterfall or in a still pond? Why?

in a cold mountain stream or in the warmer water downstream? Why?

over large rocks or over sand composed of the same material? Why?

64: Solutions are called dilute when the concentration of the solute in solution is relatively low and concentrated when the concentration is relatively high. Can a solution be both dilute and saturated? Explain your answer.

68: You visit a dude ranch located in a beautiful mountain valley at an altitude of 6000 feet. The day you arrive, you decide to take your usual evening run. On this evening, however, you don’t run as far as usual, because you feel winded and tired much sooner than at home by the beach. Why does this happen?

Penn Foster 500523RR online essay help: online essay help

Exam: 500523RR – BUS101 Final Exam

1. Everyday low pricing means _______ pricing.

A. auction-type

B. value-based

C. going-rate

D. skimming

2. Communication from one subordinate in one department to a supervisor in another department is

A. horizontal.

B. downward.

C. upward.

D. diagonal.

3. Mary in the accounting department is dealing with many work-related disputes with her manager, Nancy. It has reached to a point where Mary cannot do her job anymore. Where should Mary go to file a complaint about Nancy?

A. Ombudsperson

B. Arbitrator

C. Conciliator

D. Mediator

4. Regarding supplier performance measurement, a supplier’s willingness to participate in the minimum purchase requirement comes under _______ measures.

A. cost/price

B. service

C. quality

D. delivery

5. PRT Company produces the best computer printers in the industry. The printers are long-lasting and price friendly, and no competitor has been able to catch up with PRT Company. This is an example of

A. market segmentation.

B. competitive advantage.

C. economies of scope.

D. market research.

6. A company can increase revenues and profits if they focus on

A. loyal customers and average customers.

B. loyal customers and major customers.

C. average customers and below-average customers.

D. major customers and average customers.

7. When defective or used finished products move from customers and producers to suppliers, it’s called

A. push supply chain.

B. pull supply chain.

C. reverse logistics.

D. forward logistics.

8. A job specifications document contains which of the following?

A. Job context, schedules, and conditions

B. Job duties, tasks, and responsibilities

C. Skills, education, and experience

D. Job changes, analysis, and design

9. _______ show the amount of time needed to complete activities as well as the amount of activity that needs to be completed within a timeframe.

A. Fishbone diagrams

B. Process diagrams

C. Organizational charts

D. Gantt charts

10. The scope of private law includes which of the following?

A. Constitutional law, administrative law, and criminal law

B. Criminal law, contract law, and constitutional law

C. Tort law, administrative law, and property law

D. Contract law, tort law, and property law

11. Which of the following provides a cross-functional training in preparing an employee for future job opportunities?

A. Delegation

B. Job rotation

C. Coaching

D. Mentoring

12. Macroeconomics deals with which of the following?

A. Profits

B. Inflation

C. Income

D. Production

13. When a manufacturing company raises prices for its products, it’s a reflection of a/an

A. increase in producer price index (PPI).

B. decrease in consumer price index (CPI).

C. decrease in balance of payments (BOP).

D. increase in balance of trade (BOT).

14. A financial analyst at RMO Manufacturing Corporation has assembled the following data for the last

fiscal year. All data is in millions (M).

Gross sales $12M

Interest expenses $0.5M

Returns and allowances $1M

Taxes $0.1M

Cost of goods sold $3M

Cash dividends $0.4M

Operating expenses $3M

Common stock $1M

What is the net income or loss for the RMO Manufacturing Corporation for the last fiscal year?

A. Net loss of $4M

B. Net income of $5M

C. Net income of $4M

D. Net loss of $5M

15. Which of the following represents the correct sequence of handling physical security threats?

A. Delay → Deny → Detect → Deter

B. Deter → Deny → Detect → Delay

C. Detect → Delay → Deny → Deter

D. Deny → Detect → Deter → Delay

16. Safety stock _______ the carrying costs.

A. slightly affects

B. increases

C. decreases

D. does not affect

17. ECC Company has collected the following data on quantity produced, variable costs, fixed costs for its production, and cost analysis.

Quantity Produce Total Variable Costs Total Fixed Costs Total Costs

0 $0 $10,000 10,000

1,000 $4,000 $10,000 $14,000

5,000 $20,000 $10,000 $30,000

10,000 $40,000 $10,000 $50,000

What is the variable cost per unit at 5,000 units of production for the ECC Company?

A. $3

B. $2

C. $5

D. $4

18. Which of the following are both an open-book management practice and an informal communication method?

A. Management by walking around

B. Water-fountain meetings

C. Grapevine sessions

D. Fire-side chats

19. Which of the following bases of power refers to a person having and sharing valuable information to

others who need such information?

A. Legitimate

B. Referent

C. Expert

D. Reward

20. Which of the following network connectivity mechanisms monitor and control incoming and outgoing network traffic?

A. Routers

B. Switches

C. Sensors

D. Firewalls

21. Regarding microeconomics, which of the following considers opportunity costs?

A. Economic costs

B. Marketing costs

C. Manufacturing costs

D. Accounting costs

22. Which of the following represents the fixed costs associated with buying materials from suppliers, not including the costs of materials?

A. Carrying

B. Stock-out

C. Ordering

D. Quality

23. Which of the following represents the correct sequence?

A. Goals → Mission → Policy → Strategy

B. Policy → Strategy → Mission → Goals

C. Mission → Goals → Strategy → Policy

D. Strategy → Goals → Policy →Mission

24. Return-on-sales would be higher under which of the following pricing continuums?

A. Very low prices

B. Ceiling prices

C. Very high prices

D. Floor prices

25. When a potential buyer approaches a seller to buy materials from the seller, it’s called

A. reverse logistics.

B. traditional purchasing.

C. reverse purchasing.

D. forward logistics.

26. Which of the following inventory turnover rates indicates a high movement in selling of products for a company?

A. 8

B. 10

C. 4

D. 6

27. The scope of collective bargaining unit includes which of the following?

A. Committees, arbitrators, conciliators, and mediators

B. Management, unions, lobbyists, and regulators

C. Grievances, reprisals, wages, and working conditions

D. Consultants, contractors, advisors, and attorneys

28. The proper roles expected of the Chief Executive Officer of a company include which of the following?

A. Leader, mentor, motivator, and communicator

B. Communicator, dictator, rank-puller, and hard negotiator

C. Mentor, doubter, motivator, and hard bargainer

D. Task-oriented, coercive leader, results-driven, and hard seller

29. A portion of the balance sheet data for SPK Corporation is shown below in millions (M).

Current assets $6M

Current liabilities $3M

What is SPK Corporation’s working capital?

A. $6M

B. $9M

C. $4.5M

D. $3M

30. Higher-level managers need

A. no soft skills and all hard skills.

B. less soft skills and more hard skills.

C. more soft skills and less hard skills.

D. average soft skills and average hard skills.

31. Which of the following uses a moderator to guide the work of several members?

A. Task forces

B. Teams

C. Focus groups

D. Working groups

32. The price per unit is $120 for JMO Manufacturing Company, its variable cost per unit is $80, and its fixed costs are $4,000. What is the breakeven point in units using the contribution margin method?

A. 40

B. 60

C. 80

D. 100

33. Regarding service characteristics, which of the following is often difficult to illustrate, demonstrate, or display?

A. Highly differentiated marketing systems

B. Fluctuating demand

C. Inseparability

D. Intangibility

34. Which of the following is used to calculate the cost-of-living index?

A. Balance of trade (BOT)

B. Producer price index (PPI)

C. Consumer price index (CPI)

D. Balance of payments (BOP)

35. What’s the major requirement for low-context managers doing business in high-context cultures?

A. Formality

B. Patience

C. Promptness

D. Flexibility

36. The Securities Act of 1933 focuses on _______ transactions.

A. over-the-counter

B. computer trading

C. secondary

D. primary

37. Regarding microeconomics, which of the following statement is correct?

A. Accounting profit is greater than marketing costs

B. Accounting costs include opportunity costs

C. Accounting profit is different from economic profit

D. Economic profit is less than production costs

38. Regular payback period is defined as the

A. present value of benefits minus present value of costs.

B. net investment divided by average cash inflows.

C. present value of cash inflows divided by present value of cash outflows.

D. average annual profits divided by initial cash outlay.

39. Which of the following represents the costs associated with safety stock as a cushion?

A. Ordering

B. Stock-out

C. Quality

D. Carrying

40. Which of the following is a self-replicating mechanism?

A. Spoofing attacks

B. Virus attacks

C. Worm attacks

D. Spamming attacks

41. Which of the following groups is the primary cause for an organization’s failure?

A. Competitors

B. Management

C. Suppliers

D. Customers

42. Marketing management focuses on _______-term results.

A. long

B. short

C. near long

D. intermediate

43. Which of the following ensures non-discrimination in employment practices?

A. Office of Personnel Management

B. National Labor Relations Board

C. Department of Labor

D. Equal Employment Opportunity Commission

44. Regarding product mix, public relations is a part of

A. place.

B. price.

C. promotion.

D. product.

45. Mishandling of employees’ disciplinary procedures by an organization can create _______ risks.

A. political and economic

B. ethical and religious

C. cultural and behavioral

D. legal and financial

46. Which of the following helps in problem-solving?

A. Listening and stroking

B. Stroking and discounting

C. Listening and discounting

D. Stroking only

47. Which of the following focuses on the relationship between employee behavior and organizational

performance?

A. Organizational innovation

B. Organizational development

C. Organizational structure

D. Organizational change

48. Which of the following eliminates incoming inspection of materials coming from a supplier to a buyer?

A. Supplier reduction strategies

B. Supplier certification methods

C. Early involvement of suppliers in product design

D. Integrating suppliers

49. Which of the following leaders works to fulfill subordinates’ needs and goals as well as to achieve the organization’s larger mission?

A. Charismatic

B. Transformational

C. Servant

D. Transactional

50. Which of the following attacks refers to electronic garbage and harassment?

A. Spamming

B. Viruses

C. Worms

D. Spoofing

HIST 405N Week 4 Quiz 2 (3 Versions) college essay help los angeles

HIST 405N Week 4 Quiz 2 (Version 1)

Multiple Choice Questions: 10

1. Question : (TCO 3) The Corrupt Bargain of 1824 secured the presidency for

2. Question : (TCO 3) The creation of an integrated national economy became known as

3. Question : (TCO 1) The bloodiest slave uprising in U.S. history was

4. Question : (TCO 3) How did emigrants traveling west gain security?

5. Question : (TCO 3) Who led the Texans in drawing Santa Anna into a trap at the Battle of Jacinto?

6. Question : (TCO 2) In the 1848 election, why were Whigs and Democrats forced to take a stand on slavery?

7. Question : (TCO 3) How did northerners respond to the Fugitive Slave Act?

8. Question : (TCO 2) Why did John Brown attack the arsenal at Harpers Ferry?

9. Question : (TCO 8) Lee’s smaller army defeated McClellan’s larger force and kept Union troops out of

10. Question : (TCO 8) Which of the following characterizes Sherman’s march across Georgia?

Essay Question: 1

11. Question : (TCO 2) Identify and analyze the arguments over slavery in the New Western Territories after the Mexican War (1846–1848). How did northern and southern Democrats differ over this issue? Then describe the presidential election of 1848. Identify the key parties and candidates. Analyze how the results of this election set the stage for a reconfiguration of American politics that ultimately led to Civil War. Be sure to use enough details to support your answer.

HIST 405N Week 4 Quiz 2 (Version 2)

B-C

Question: (TCO 3) By 1835, Texas was home to about 30,000 American settlers, known as

Question : (TCO 2) Congress tried to resolve the dispute between the North and the South about slavery in the territories by:

Question: (TCO 3 ) How did industrialization affect the relationship of the United States with the world?

Question : (TCO 3) How did emigrants traveling west gain security?

Question : (TCO 3) How did northerners respond to the Fugitive Slave Act?

Question: (TCO 2) Immediately prior to “Bleeding Kansas” what kind of government had been established din the Kansas-Nebraska territory?

Question: (TCO 3) In the early 19th century, the largest source of European immigration came from

Question : (TCO 3) In the 1800s, people became more interested in religion as a result of:

Question: (TCO 3) In 1847, Mormons emigrated to the area between the Rocky Mountains and the Great Salt Lake to

Question: (TCO 2) In the 1848 election, why were Whigs and Democrats forced to take a stand on slavery?

Question : (TCO 2) In 1856, Border Ruffians attacked:

J_L_M

Question. (TCO 3) James Polk

Question. (TCO 8) Lee’s smaller army defeated McClellan’s larger force and kept Union Troops out of Richmond because

Question. (TCO 2) Millard Fillmore, the last Whig president, angered

Question. (TCO 8) One advantage the South had over the North was hat southerners believed

Question. (TCO 1) Slavery expanded with the growth of

Question : (TCO 1) Southerners believed that slave labor was superior to the paid labor force in the

Question: (TCO 3) The assertion that states the right to disobey federal law was called

Question: (TCO 1) The bloodiest slave uprising in U.S. history was

Question: (TCO 3) The creation of an integrated national economy became know as

Question: (TCO 3) The Corrupt Bargain of 1824 secured the presidency for

Question: (TCO 2) The Fugitive Slave Act adopted in 1850

Question: (TCO 3) The Waltham System

Question: (TCO 2) What law was found to be unconstitutional in the Dred Scott decision?

Question: (TCO 8) Which Civil War battle decisively turned the tide of war in favor of the Union?

Question: (TCO 3) Which groups lived in communal societies?

Question: (TCO 8) Which of the following characterizes Sherman’s march across Georgia?

Question: (TCO 3) Which of the following helped James K. Polk win decisive presidential victory?

Question. (TCO 3) Who extolled the equality of conditions in his book Democracy in America?

Question : (TCO 3) Who led the Texans in drawing Santa Anna into a trap at the Battle of Jacinto? Question : (TCO 2) Why did John Brown attack the arsenal at Harpers Ferry? He wanted to avenge

Question : (TCO 8) Why did Lincoln announce, early in the Civil War, that he would not free enslaved people?

Question : (TCO 8) Why did President Lincoln want Grant commanding the Union army after the

HIST 405N Week 4 Quiz 2 (Version 3)

Question: (TCO 2) Identify and analyze the main provisions of the Compromise of 1850. Be sure and analyze the problem of California and how this led to the Compromise.

Then analyze how the Compromise set off a storm of political controversy between 1849-1850. Identify the key players and how they viewed the Compromise. What was the role of President Zachary Taylor in these discussions? Be sure to use enough details to support your answer.

Question: (TCO 2) Identify and analyze the arguments over slavery in the New Western Territories after the Mexican War (1846 -1848). How did northern and southern Democrats differ over this issue? Then describe the presidential election of 1848. Identify the key parties and candidates. Analyze how the results of this election set the stage for a reconfiguration of American politics that ultimately led to Civil War. Be sure to use enough details to support your answer. (Points : 20).

Question: (TCO 2) Identify and analyze the Dred Scott Decision. Be sure to discuss the political reaction to this decision. Then analyze the election of 1860 and how the controversy over slavery divided the party into northern and southern branches. Analyze the ascendency of Abraham Lincoln to the presidency. Be sure to use enough details to support your answer.

Final Exam Case Study write essay help: write essay help

Final Exam Case Study, Columbia Custom Carpentry, which is attached below. The file name is HRMD 640 Final Exam.pdf. You are to answer all of the questions. Please ensure that your answers are complete. This assignment will be graded according to the Final Exam Rubric that is posted below.

There are 4 files needed to complete this assignment (Please see attachment)

~~~~

1. In your opinion, what is causing the turnover at Columbus Custom Carpentry? 10 points.

2. Are the assembly technicians overpaid? Explain. 10 points.

3. Are the craters underpaid? If so, why? Will they still be underpaid if the custom hand-work portion of their job is eliminated by the jig system? Explain. 15 points.

4. Given the case and market information, is the CFO position best aligned with that of an accounting manager, director, or a CFO? Explain. 10 points

5. Are there differences in pay that appear to be based on sex/race/ethnicity rather than performance or length of service? How so or why not? 15 points

6. Given your answers to the previous questions, exactly how would you rectify the key issues within Columbus Custom Carpentry? What resources/references support your plan of action? 40 points.

Unit5PeerResp2QDA essay help cheap: essay help cheap

Unit5DiscPeerResp2QDA

Response Guidelines

Provide a substantive contribution that advances the discussion in a meaningful way by identifying strengths of the posting, challenging assumptions, and asking clarifying questions. Your response is expected to reference the assigned readings, as well as other theoretical, empirical, or professional literature to support your views and writings. Reference your sources using standard APA guidelines. Review the Participation Guidelines section of the Discussion Participation Scoring Guide to gain an understanding of what is required in a substantive response.

Peer 1 Response: Cait

Anderson & Bushman (2001) conducted the meta-analysis, Effects of Violent Video Games On Aggressive Behavior, Aggressive Cognition, Aggressive Affect, Physiological Arousal, and Prosocial Behavior: A Meta-Analytic Review of the Scientific Literature, which determined that there was a correlation between playing video games and aggressive behaviors. In a set of 21 controlled experimental studies, Anderson & Bushman (2001) concluded that there was a correlation between playing video games (x) and engaging in the aggressive behavior (y). Table 1 determined that aggressive behavior was measured at r= .19, therefore concluding that the correlation was statistically significant due to a large number of participants that were involved in the research study. Aggressive behavior in conjunction with playing violent video games was tested with 3,033 participants. If there was a smaller sample size (in this case, less than 3,033 participants), the correlation r=.19 may not have been as large or as significant. This result also yielded significant results because r=.19 is positive, rather than negative. In Table 1 it can also be determined that the results displayed significant results because of the homogeneity test. The homogeneity test determined an outcome of x2(32) 23.25, p > .05 (Anderson & Bushman, 2001). It was measured that the p score was 23.25, compared to the normal value used by SPSS and researchers, which is .05. Because the p-value was larger than .05, it yielded significant results for this research study. If the p-value was smaller than .05, it would not hold the same level of significance.

Reference

Anderson, C. A., & Bushman, B. J. (2001). Effects of violent video games on aggressive behavior, aggressive cognition, aggressive affect, physiological arousal, and prosocial behavior: A meta-analytic review of the scientific literature. Psychological Science, 12(5), 353–359.

Peer 2 Response: Teddick

A meta-analysis (Anderson & Bushman, 2001) reported that the average correlation between time spent playing video games (X) and engaging in aggressive behavior (Y) in a set of 21 well-controlled experimental studies was .19. This correlation was judged to be statistically significant. In your own words, what can you say about the nature of the relationship?

Warner (2013) explained that in a result of .19 will fall among the small (r

Order Plagiarism-Free Answer

Chemistry 2 Essay Help Free

Mod 6 Accounting Hw college essay help online: college essay help online

Project Management Discussion 3 cheap mba definition essay help

Sat Questions college essay help online: college essay help online

Explain Genre Theory And, Using Chapter 4 Of The Text As A Reference, Thoroughly Describe The Conventions And Attributes Of Your Selected Genre. persuasive essay help

Accounting Homework buy essay help

ACCT 131 Chapter 1 Homework essay help cheap: essay help cheap

Question 5 history essay help

Accounting Week 4 Quiz essay help websites: essay help websites

Grand View University OPERATION MGT 455 – Problem Set 6 essay help us: essay help us

BUSI 520 – Quiz 2 essay help service

A Solution Contains 5 Grams Of Glucose Per 100 Milliliters. Each Mole Of Glucose free essay help: free essay help

Chlorination of alkanes can produce a multitude of products. need essay help

RES-866, Week 2.Assignment: Module 2 Problem Set buy essay help

Kelly Pitney began her consulting business, Kelly Consulting, on April 1, 2016. essay help 123: essay help 123

5-2A Prepare A CVP Income Statement, Compute Break-Even Point, Contribution Margin Ratio, Margin Of Safety Ratio And Sales For Target Net Income writing essay help

Conch Republic Electronics Is A Mid Sized Electronics Manufacturer Located In Key West, Florida cbest essay help: cbest essay help

BST 322 Week 2 Assignment professional essay help: professional essay help

Strategic Principles Of Consensus Organizing buy argumentative essay help

Three Beads Are Placed Along A Thin Rod. essay help free: essay help free

ACC 303 Homework Chapter 3 essay help 123

For each of the following pairs of gas properties, describe the relationship between the properties, describe a simple system that could be used to demonstrate the relationship, and explain the reason for the relationship: college essay help online

Penn Foster 500523RR online essay help: online essay help

HIST 405N Week 4 Quiz 2 (3 Versions) college essay help los angeles

Final Exam Case Study write essay help: write essay help

Unit5PeerResp2QDA essay help cheap: essay help cheap

Like this:

Similar Questions

Mod 6 Accounting Hw college essay help online: college essay help online

Project Management Discussion 3 cheap mba definition essay help

Sat Questions college essay help online: college essay help online

Explain Genre Theory And, Using Chapter 4 Of The Text As A Reference, Thoroughly Describe The Conventions And Attributes Of Your Selected Genre. persuasive essay help

Accounting Homework buy essay help

ACCT 131 Chapter 1 Homework essay help cheap: essay help cheap

Question 5 history essay help

Accounting Week 4 Quiz essay help websites: essay help websites

Grand View University OPERATION MGT 455 – Problem Set 6 essay help us: essay help us

BUSI 520 – Quiz 2 essay help service

A Solution Contains 5 Grams Of Glucose Per 100 Milliliters. Each Mole Of Glucose free essay help: free essay help

Chlorination of alkanes can produce a multitude of products. need essay help

RES-866, Week 2.Assignment: Module 2 Problem Set buy essay help

Kelly Pitney began her consulting business, Kelly Consulting, on April 1, 2016. essay help 123: essay help 123

5-2A Prepare A CVP Income Statement, Compute Break-Even Point, Contribution Margin Ratio, Margin Of Safety Ratio And Sales For Target Net Income writing essay help

Conch Republic Electronics Is A Mid Sized Electronics Manufacturer Located In Key West, Florida cbest essay help: cbest essay help

BST 322 Week 2 Assignment professional essay help: professional essay help

Strategic Principles Of Consensus Organizing buy argumentative essay help

Three Beads Are Placed Along A Thin Rod. essay help free: essay help free

ACC 303 Homework Chapter 3 essay help 123

For each of the following pairs of gas properties, describe the relationship between the properties, describe a simple system that could be used to demonstrate the relationship, and explain the reason for the relationship: college essay help online

Penn Foster 500523RR online essay help: online essay help

HIST 405N Week 4 Quiz 2 (3 Versions) college essay help los angeles

Final Exam Case Study write essay help: write essay help

Unit5PeerResp2QDA essay help cheap: essay help cheap

Share this:

Like this:

Similar Questions